Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Suitable Lamp Types
LED 365 nm, LED 400 nm
Features & Benefits
- Ready-to-Use Product Features
- Special Features
compliant with RoHS Directive 2015/863/EU
Applications & Uses
- Markets
- Applications
- Cure Method
- Typical Area Of Use
- -40 - 150 °C
- pin sealing
- pin potting
- General Curing and Processing Information
The curing time stated in the technical data was determined in the laboratory. It can vary depending on the adhesive quantity and component geometry and is therefore a reference value.Increasing or decreasing the curing temperature and / or irradiation intensity and / or irradiation time shortens or prolongs the curing time and can lead to changed physical properties.All curing or light fixation parameters depend on material thickness and absorption, adhesive layer thickness, lamp type and distance between lamp and adhesive layer.Values measured after 24 h at approx. 23 °C / 50 % r.h., unless otherwise specified.
Properties
- Typical Properties
Value Units Test Method / Conditions Typical Irradiation Time (Intensity 200 Mw/Cm² Led 400 Nm) 7.0 s - Typical Irradiation Time (Intensity 200 Mw/Cm² Led 400 Nm) 4.0 s - Typical Curing Time At +110 °C In Air Convection Oven 100.0 min - Typical Curing Time At +120 °C In Air Convection Oven 50.0 min - Typical Curing Time At +130 °C In Air Convection Oven 25.0 min - Conditioning Time (Typical) When Stored In Cold Conditions In Containers Up To 50 Ml 30.0 min - Conditioning Time (Typical) When Stored In Cold Conditions In Containers Up To 1,000 Ml 4.0 h - Processing Time (Rt Approx. +23 °C) 15.0 d - Color In Uncured Condition Blue - - Color In Cured Condition In 0.1 Mm Layer Thickness Blue - - Color In Cured Condition In 1 Mm Layer Thickness Blue - - Fluorescence Fluorescent - - - Processing Parameters
Value Units Test Method / Conditions Density Delo Standard 13 | Liquid 1.0 g/cm³ - Viscosity Liquid | Viscosimeter 1500.0 mPa·s - Compression Shear Strength Delo Standard 5 | Glass | Stainless Steel | 400 Nm | 200 Mw/Cm² | 60 S 5.0 MPa - Compression Shear Strength Delo Standard 5 | Glass | Pa6 | 400 Nm | 200 Mw/Cm² | 60 S 5.0 MPa - Compression Shear Strength Delo Standard 5 | Pc | Pc | 400 Nm | 200 Mw/Cm² | 60 S 7.0 MPa - Tensile Strength Based On 400 Nm | 200 Mw/Cm² | 90 S 6.0 MPa Din En Iso 527 Elongation At Tear Based On 400 Nm | 200 Mw/Cm² | 90 S 470.0 % Din En Iso 527 Shore Hardness A Based On 400 Nm | 200 Mw/Cm² | 90 S 35.0 - Din En Iso 868 Shrinkage Delo Standard 13 | 400 Nm | 200 Mw/Cm² | 90 S 6.5 vol. % - Water Absorption (Based On Layer Thickness: 4 Mm | 400 Nm | 200 Mw/Cm² | 90 S | Type Of Storage: Media | Medium: Distilled Water | Storage Temperature: At Approx. +23 °C) 0.8 % Din En Iso 62
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Converting Table
°F = (°C *1.8) +32
1 inch = 25.4 mm
1 mil = 25.4
1 oz = 28.3495 g
1 MPa = 145.04 psi
1 GPa = 145.04 ksi
1cP = 1 mPa•s
IN = 0.225 lb
Storage & Handling
- Storage Life
In Unopened Original Container (0°C To +10 °C) is 6 months