Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
DayGlo® StarFire II Inks are formulated from DayGlo StarFire II Base colors. They are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability. StarFire II Inks were developed to meet the needs of the printer and the color specifier. They are available from DayGlo Color Corp. in eleven standard fluorescent colors, seven Pantone® 800-series** colors and seven Fresh Colors™ (double bump strength in a single bump).
- Features & Benefits
- Stronger, brighter colors.
- Excellent tack stability.
- Advanced rheology for better press performance.
- Faster setting & drying.
- Non-chalking.
- Ultra low emulsification properties.
- Improved ink transfer characteristics.
- Reduced VOC level
- Color Strength, Brightness & Finish
StarFire® II Inks will dry to a uniform satin finish. This enhances the color brightness and brilliance. The StarFire II Inks have excellent transfer properties and produce strong, transparent colors.
- Rheology
StarFire II Inks offer excellent rheology. They have body similar to conventional offset inks and show excellent performance in the ink fountain and on the roller train, producing a consistent ink flow on press.
- Stock
DayGlo® StarFire II Inks are semi-transparent. It is important to print on stocks having good whiteness and opacity. Printing on dark stock or over dark ink will result in a noticeable loss of fluorescent color. However, attractive color effects may be obtained by printing over light, clean, non-fluorescent stock or ink. StarFire II Inks are transparent enough to be trapped over black ink without a noticeable loss of black color and density.
Applications & Uses
- Markets
- Applications
- Low Odor
StarFire II Inks are formulated with severely hydrotreated ink oils only. They have been formulated to produce low odor on the press, even when using infrared lamps to assist drying.
- Anti-Emulsification
StarFire II Inks have excellent anti-emulsification properties that allow heavier ink film thicknesses to be carried on the press. Printers are encouraged to run StarFire II Inks to its limit. StarFire II Inks will perform well with solids as well as half tones.
- Types of Presses & Dampening Systems
StarFire II Inks will run well on a wide range of presses due to emulsification resistance. Both Dahlgren and conventional dampening systems on large presses are fully compatible with the StarFire II Inks. Also, these inks will run very clean on the integrated dampening systems of the smaller duplicator type presses.
Fountain Solutions:
The StarFire II Inks work best with a fountain solution pH of 4.0 to 5.5. The addition of up to 25% isopropanol alcohol to the fountain solution will aid in anti-emulsification properties of the ink. Fountain solutions containing alcohol substitutes will work well, but ink film thicknesses may have to be reduced for optimum results.
Rub Resistance:
The satin ink film of the StarFire® II Inks can burnish with rubbing, but will adhere well to the stock when dry. If additional rub protection or product resistance is desired, an overprint varnish from DayGlo Color Corp. or equivalent may be applied. All overprints should be tested to confirm that the desired results are achieved.
Halftones:
Where halftones are to be printed, color strength of solid copy will be governed by the density of the halftones in the copy. StarFire II Inks will print sharp halftones at normal ink film thicknesses. To achieve maximum color effects with solid color artwork, the halftones should be minimized or eliminated.
Properties
- Color
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Color 78-82 % - Tack (at 1200 RPM, for 1 min. at 90ºF) 13-15 - - Ten Minute Tack Rise (at 1200 RPM, 90ºF) 3 - - Volatile Organic Compounds 1.0 - 1.2 (130 - 140) Lbs./Gal (g/l) - Wax PTFE (Teflon) - - Weight Per Gallon 8.8 - 9.0 Lbs./Gal. -
Technical Details & Test Data
- Press Performance
StarFire II Inks have superior press stability. Tests indicate an average tack rise of only 0.3 points per minute or less at 1200 RPM and 90oF. They are fully capable of being run on sheetfed, offset presses at 12,000 to 15,000 impressions per hour.
- Condition of Press
Cleanliness of the press and, especially, of the rollers is essential for good fluorescent color brightness. If initial results are not as clean or as bright as the StarFire® II Ink color guide, the ink should be checked for possible contamination. If contamination is suspected, a small sample of the ink from the form rollers scraped down side-by-side on uncoated stock against ink from the can will usually confirm the fact. Rollers should not be pitted or cracked, as this is also a source of contamination
- Drying
DayGlo® StarFire II Inks are extremely fast setting. Infrared lamps will accelerate the setting and drying somewhat. Moderate use of non-offset spray powder is recommended for heavy ink deposits. Non-offset spray may be reduced or eliminated on normal ink deposits. The StarFire II Inks are also completely compatible with aqueous coatings. The addition of more driers to the ink may increase through drying time, but may also affect the final color and color brightness. Do not add additional driers, unless unusual conditions exist. The addition of Cobalt drier will accelerate drying, but will also darken the color and cause color instability
- Mileage
For ink estimating, the StarFire II Inks yield approximately 300,000 to 350,000 square inches per pound on coated stock and about 100,000 to 200,000 square inches per pound on uncoated stock. Ink mileage can vary greatly, however, with applied ink film thickness.
Storage & Handling
- Color Stability & Shelf Life
StarFire II Inks are color stable and will not darken. The minimum shelf life on this product is 24 months from the date of manufacture
- Setting & Drying
StarFire II Inks set and dry very fast. This reduces "work and turn" time and improves handling time for fluorescent printed jobs. However, they do require 24 hours for full oxidation.