Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Pigment Type
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
DAY-GLO Fluorescent Water Dispersions were developed for applications in latex and tempera paints, water colors, paper coatings and other aqueous systems. They are anionically stabilized, offer excellent tinctorial strength and eliminate dusting encountered when using dry pigments.
DAY-GLO Fluorescent Water Dispersions contain 50% fluorescent pigment and no binder.
- Properties
- contain DAY-GLO AX
- Pigments
- high tinctorial strength-excellent money value
The pH of a formulation, as well as certain additives, can influence the performance of the fluorescent dispersions and their effects should be tested. We recommend maintaining a pH of 7-8 for best stability
- Color Development
DAY-GLO Fluorescent Water Dispersions are transparent. To optimize the fluorescent effect they should be applied over white. If adding TiO2, the amount should not exceed 2% based on the weight of the fluorescent dispersion. The addition of too much white will reduce the fluorescent effect.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Ink & Toner Type
- Applications
- Paper Coating
- Textile
- Aqueous Inks
- Suggested Formulations
A. Fluorescent Paper Coating
Pounds DAY-GLO WAX-14 (50% Solid) 76.8 Glycerine 1.5 Polyvinyl Acetate Binder (45% solids) 21.7 100.0 Thin with water to desired viscosity.
For more information please refer: https://media.knowde.com/image/upload/v1618402385/production/Collateral/248081/WAX_WT_Dispersions.pdf
Properties
- Color
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Average pH 6.8-7.2 - - Average Viscosity 3500 cPs - Percent Pigment Solids 50 % - Specific Gravity 1.14 - - Weight Per Gallon 9.5 - -
Technical Details & Test Data
- Lightfastness
DAY-GLO Fluorescent Water Dispersions exhibit good lightfastness for interior applications but have limited use in exterior applications. Evaluations should be conducted to determine if the use of DAY-GLO dispersions will meet lightfastness requirements. Various approaches can be taken to improve outdoor performance such as:
- increased loading of DAY-GLO Dispersions
- heavier film deposit or multiple coats.
- additions of UV stabilizers.
- clear top coat containing UV stabilizers.
Storage & Handling
- Stability
DAY-GLO Fluorescent Dispersions offer storage stability of two months. All dispersions should be protected from freezing.