Creative Materials 117-33

• Contains flammable solvents.
• Use with adequate ventilation.
• Keep away from sparks and open flames.
• Avoid prolonged contact with skin and breathing of vapors.
• Wash with soap and water to remove from skin.

117-33 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner # 113-12. Prior to using, be certain to resuspend filler. Apply thin film of adhesive to both surfaces to be bonded. Heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.

Shelf life: 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
NOTE: Use catalyzed product within 24 - 36 hours.