Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
Properties
- Typical Cured Properties
Value Units Test Method / Conditions Viscosity (#CP-51, 1O/s) 25,000 - 35,000 cps - Thixotropic Index (1/10) 3 - - Filler Silver - - Percent Silver (cured) 84 - - Percent Solids 84 - 89 - - Volume Resistance (80°C cure) max. 0.0001 Q-cm - Volume Resistance (140°C cure) max. 0.00008 Q-cm - Thermal Conductivity 12.7 W/m-K - Useful Temperature Range -70 to 260 ºC - Thermal Stability Good to 325 °C - - Properties
Solderable - After plating
Safety & Health
- Safety & Handling
Contains flammable solvents. Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months at -40°C, 3 months at 25°C, 6 months at -10°C
- Suggested Handling & Curing
102-32G1 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. For best mechanical properties heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. See typical cured properties table for lower temperature cure profiles. Add 0.25 - 0.5% by weight B-507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 25°C to 200°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Storage
Shelf life: 3 months at 25°C; or 6 months at -10°C; or 12 months at -40°C.
NOTE: Use catalyzed product within 24 - 36 hours.
*102-32G1 packaged in syringes must be kept frozen at -40°C