Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Sizing Type
- Silane
- Glass Type
- ECT/ECR/TM
- Technologies
- Product Families
- Identification
Example: ECT 468HS-2400
ECT: Boron Free E – Glass
468HS : CPIC sizing reference
2400: Linear nominal weight of roving (Tex)
Features & Benefits
- Labeling Claims
- Product Benefits
- The rovings are the most suitable for epoxide resin(IPDA) and anhydride curing.
- Low fuzz
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Composites End Use
- Composites Processing Methods
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Filament Diameter ±1 % ISO1887 Filament Diameter 16 μm - Moisture Content max. 0.10 % ISO3344 Tensile Strength (<1200Tex) min. 0.35 N/Tex ISO3341 Tensile Strength (≥1200Tex) min. 0.30 N/Tex ISO3341 Linear Density 1200 tex(g/km) - LOI 0.55 % -
Regulatory & Compliance
- Certifications & Compliance
- Certifications
- ISO 9001
- ISO 14001
- OHSAS 18001
Packaging & Availability
- Packaging Type
- Packaging
Each roll of roving is wrapped by shrinkage packing or tacky-pack, then put into pallet or carton box, 48 rolls or 64 rolls each pallet.
- Pallets Characteristics
Product Levels per Pallet Rovings per Pallet Rovings per Level Pallet Dimensions L x W x H (mm) Net Weight approx. (Kg)
Direct Roving 3 48 16 1140 x 1140 x 940 816 Direct Roving 4 64 16 1140 x 1140 x 1230 1088
Storage & Handling
- Storage
The rovings should be stored away from heat and moisture, and in their original packaging. The best conditions are: temperatures between 15 and 35 ºC; humidity between 35 and 65 %. If the product is not stored under these specifications, it is advisable to condition it in the workshop for at least 24 hours before use, to prevent condensation. The pallets can be stored in 2 levels (1/1). CPIC recommends that the material be used according to FIFO (first in, first out) method. It is recommended the use of a spacer plate (10mm) between the pallets