COMEC ITALIA PLT26

• PLA thinner.
• PLB fast thinner.
• PLD retardant.
• PPLD retardant paste.
• PP2 adhesion promoter.

This is Acrylic based ink. It is a single-component ink. It has a matt appearance and an excellent covering power and is quick drying. Atoxic ink (AT) conforms to European regulations EN 71/part 3 and European Directive 2011/65/EC (RoHS 2). Do not use on tools or objects which are to be handled.

PROCESSING
Mix and strongly dilute the ink by using the PLA thinner in the measure of max. 10-20%. When printing fine details or screened images (e.g. 80/120 lines per cm^2) in warm environments, we recommend you add the PLD retardant in a minimum percentage.

CAUTION!

Excessive dilution generates a loss of the covering power, smudges and an imperfect detachment of the ink from the pad. An insufficient dilution causes problems of drawing the ink from the cliché, printing repeatability and dripping of the ink with a consequent decline of the printing quality.
DRYING AND HARDENING
The drying time lasts between 2 and 3 minutes at an ambient temperature of about 20°C. If you would like it to dry in only a few time, you can use hot air circulation ovens (60-80°C) or high temperature spot devices (air or infrared rays) that can be installed on the piece feeding systems (e.g. rotary tables, conveyors, etc.).