Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Applications & Uses
Application area and materials
For common European woods and wood materials, synthetics, stone, ceramics, metals, insulating materials, concrete and non-flammable building boards. For tropical timber and woods with a high content of ingredients, we recommend performing bonding tests. For applications in exposed areas it is essential to seek clarification on the parts intended use and to perform bonding tests.
Application data
The curing behavior of 1C PUR adhesives depends on the moisture content and temperature of the adherends and the ambient climate. The figures are based on results of tests on precision bonds (wood moisture content 12%) made under standard conditions (20 °C and 65% relative humidity). Different conditions may lead to deviations from the said specification.
Application
It is essential that the surfaces are clean and grease-free in order to provide the best adhesion and quality of join. Apply the adhesive directly from the container and spread using the appropriate Collano spatula. When applying from plastic tank, follow the Collano Easy Applico 1000 operating instructions. The adherends should first be conditioned to match the climatic conditions of the intended application area, before gluing.
Clean-up
Wipe off any splashes of liquid adhesive using Collano HP 3000, Collano HP 3100 or ethanol. Remove cured adhesive using Collano HP 3000.
Preventing and blocking adhesion
Collano HP 2000 can prevent adhesion to equipment, tools and machinery
Properties
- Color
- Physical Form
- Appearance
- Liquid
- Typical Properties
Value Units Test Method / Conditions Base Polyurethane - - Density 1.1 g/cm³ - Solids Content 100.0 % - Fluidity Free flowing - - Viscosity (Brookfield) 6'000 - 8'000 mPa·s - Pressure 0.1 - 1.0 N/mm² - Material Moisture Content 6 - 18 % - Application Temperature 10 - 30 °C - Maximum Open Assembly Time max. 5 seconds - Minimum Press Time min. 10 minutes - Final Strength 7.0 days - - Adhesive Properties
Value Units Test Method / Conditions Adhesive Application Quantity 100 - 300 g/m² -
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Technical Details
Performance | Material Properties
Information derives from tests carried out by Collano.
Bond Strength
- EN 12765, stress group C4.
Temperature Resistance
- 120 °C at short-term temperature stability.
Fire Resistance Category
- EN 13501, provided the appropriate materials and constructions are used.
Resistance
- Resistant against weak caustics, acids and solvents.
Eco Label
- EcoBasis, does not violate any Minergie-ECO exclusion criteria.
Safety & Health
- Safety & Health
Safety
The wearing of protective gloves and safety goggles is recommended while handling the liquid product.
Packaging & Availability
Storage & Handling
- Storage
Storage
6 months in unopened original packaging at 15–25 °C. Store packaging up side down.