Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications & Uses
Application area and materials
For window and door bonding, lamellae and finger-joints for non-structural applications, divider and element manufacture, general bonding of woods and composites in kitchen, laboratory, and interior construction. Suitable for exterior applications if the joints are protected against direct weather exposure. Suitable for high frequency bonding.
Application data
The curing behavior of PVAc dispersions depends on the absorbency and strength of the adherends, as well as the ambient temperature and press temperature. The specified figures are guideline values and are based on results of tests on precision bonds made under standard climatic conditions (20°C and 65% relative humidity). Deviations are possible depending on the type of use.
Application
It is essential that the surfaces are clean and grease-free in order to provide the best adhesion and quality of join. Apply adhesive to one surface, in case of high requirements to water resistance to both surfaces. Stir before use.
Minimum press time
- 20 °C: > 15 minutes
- 70 °C: > 1 minute
Additional details
In contact with iron, adhesive may cause wood discoloration. Due to the risk of corrosion, all parts which come in contact with this glue during processing must be made of stainless steel (quality V4A) or synthetic material.
Clean-up
With water before adhesive has dried.
Properties
- Color
- Physical Form
- Appearance
- Liquid
- Typical Properties
Value Units Test Method / Conditions Base PVAc - Dispersion - - Density 1.0 g/cm³ - Solids Content 45.0 % - Fluidity Flowing - - Viscosity (Brookfield) 6'000 mPa·s - pH 4.0 - - Chalking Point 8.0 °C - Pressure 0.1 - 0.8 N/mm² - Material Moisture Content 8 - 12 % - Application Temperature min. 12 °C - Maximum Open Assembly Time max. 9 minutes - Conditioning Time 2.0 hours - Final Strength 7.0 days - - Adhesive Properties
Value Units Test Method / Conditions Adhesive Application Quantity 150 - 200 g/m² - - Flame Characteristics
Value Units Test Method / Conditions Flammability Not flammable - -
Technical Details & Test Data
- Technical Details
Performance | Material Properties
Information derives from tests carried out by Collano and testing institute ift Rosenheim.
Bond Strength
- EN 204, stress group D4
Temperature Resistance
- EN 14257 (Watt 91) > 7 N/mm² at 80 °C
Eco Label
- Eco-1, very suitable for Minergie-ECO
Guidelines
- FFF-FKS-EMPA 08.03/2013
Packaging & Availability
- Packaging Type
- Packaging & Availability
Packaging
- Plastic pails 25 kg
- IBC containers 1'100 kg.