CIMTECH - 46C - Cimcool - Carbide - Synthetic

Enhanced TDS

Base Oil Type: Synthetic Oil
Metalworking Fluid Type: Synthetic
Product Type: Metalworking Fluids
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Fluids & Lubricants
Metalworking Fluids

Labeling Claims: Silicone-free
Ready-to-Use Product Features: Corrosion Resistant,
Defoaming
Features and Benefits: Superior Cobalt Corrosion Inhibition:
CIMTECH 46C is designed to maintain low levels of dissolved cobalt in the mix.
Excellent Rancidity Control:
Excellent fluid life, minimizing the need for additives.
Excellent Foam Control:
CIMTECH 46C has good foam control.
Corrosion Protection:
Outstanding rust protection for the work-piece and machine tool.

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Application Area: Machining Operations
Compatible Substrates & Surfaces: Carbide,
Iron,
Metal
Applications: CIMTECH 46C can also be used to machine and grind cemented carbide, cast iron, nodular iron, carbon steels and tool steels. It should not be used on magnesium alloys or non-ferrous materials.
Concentration: BCG Titration, Total Alkalinity or Refractometer can be used.
The Refractometer Factor is 1.9. Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking the concentration on a fresh charge.

Color

Transparent

Physical Form

Liquid

Appearance

Clear

Odor

Chemical

Solubility in Water

100% Miscible

Typical Properties

Recommended Starting Dilutions: CIMTECH 46C is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55°F (13°C). Add no other materials to the concentrate or mix unless approved by your CIMCOOL® Territory Manager.
Grinding 5% - 10% (1:20 to 1:10)
Machining 5% - 10% (1:20 to 1:10)

Handling and Storage: If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.