CIMSTAR - 70-HFP - Cimcool - Aluminum - Semi-Synthetic

Enhanced TDS

Base Oil Type: Semi-Synthetic
Metalworking Fluid Type: Semi-Synthetic
Product Type: Metalworking Fluids
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Fluids & Lubricants
Metalworking Fluids

Ready-to-Use Product Features: Corrosion Resistant,
Extreme Pressure Performance,
Low Foaming
Features and Benefits: Cleanliness:
Cimstar 70-hfp Has Unique Residue Characteristics, Keeping Machine Tools Extremely Clean. The Detergency Of The Product Keeps Chips From Building Up On The Machine Tool.
Foam Control:
Cimstar 70-hfp Exhibits Adequate Foam Control In High Pressure Applications.
Corrosion Control:
The Product Also Has Excellent Corrosion Control For Steel, Cast Iron And Most Aluminum Alloys.

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Application Area: Boring Applications,
Drilling Applications,
Milling Operations,
Reaming,
Tapping Operations,
Turning Operations
Compatible Substrates & Surfaces: Aluminum,
Metal,
Steel
Applications: CIMSTAR 70-HFP is recommended for general purpose machining of ferrous and most non-ferrous applications.
It can be used for multiple applications such as turning, drilling, reaming, boring, milling and tapping as well as some grinding operations.
Concentration: Non-solvent Titration, Total Alkalinity or Refractometer can be used.
The Refractometer Factor is 1.4. A refractometer is only recommended for use in checking the concentration of a fresh charge. Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing.

Physical Form

Liquid

Appearance

Hazy

Odor

Chemical

Solubility in Water

100% Miscible

Typical Properties

Recommended Starting Dilutions: CIMSTAR 70-HFP is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55F. Add no other materials to the concentrate or mix unless approved by your CIMCOOL® District Manager.
Grinding 5% - 10% (1:20 to 1:10)
Machining 5% - 10% (1:20 to 1:10)

Handling and Storage: If frozen thaw completely at room temperature before use. Inside storage is recommended.