CIMSTAR® 585

• Developed by latest technology of metalworking fluid.
• Excellent corrosion control on cast iron, steel and typical grades of aluminum including 2024, 7075, 390 and 6061
• Good lubricity making tool life extended.
• Contains new biocide package for long coolant life
• Good antibacterial performance.
• Mix remains stable as water hardness increases.
• Easy to use and maintains.

CIMSTAR® 585 can be used in central coolant systems or individual machine sumps.
Metals: Carbon Steels, High Speed Steel, Cast Steels, Alloy Steels, Tool Steel, Stainless Steel, Cast Iron, Aluminum, including ADC type Aluminum Alloys.
Duty Range: Moderate to Heavy-duty.

1. Ensure that the refractometer (figure 1), water and metalworking fluid are at room temperature.
2. Place a few drops of water between the plastic cover and the prism.
3. Hold the refractometer horizontally and point it at a light source.
4. Look into the eyepiece and adjust the scale-calibrating screw until the boundary line, which separates the light and dark areas of the scale are aligned to zero “0” on the scale.
5. Lift the plastic cover and dry the prism with a clean, dry cloth.
6. Place one or two drops of the metalworking fluid on the prism and close the plastic cover.
7. Read the number on the scale at the point where the boundary line separates the light and dark areas on the scale (Figure 2). For the concentration, multiply this number by the refractometer factor.
CIMSTAR® 585 to be mixed with water for use (add concentrate to water). Add no other substances to the concentrate or mix unless approved by CIMCOOL® Technical Services.
For concentration analysis, use Total Alkalinity Titration Procedure, BCG Titration Procedure, CIMCHEK™ Test Strip, or Refractometer.


Example:
CIMSTAR® 585 Refactometer Factor = 1.6 Take the Refractometer Scale Reading of 2.0 (i.e. Figure 2), multiplied by the Refractometer Factor of 1.6 = 3.2% mix concentration.

200L drums, 20L pails & 5L packs