VARIPHOB® CC 4272

• Strongly reduces the capillary water absorption
• Reduce salt absorption
• Reduce the chloride absorption
• Low tendency to dirt pick up
• Excellent water vapor permeability
• Improves resistance to feeze-thaw cycling and de-icing salt stress
• Increases the durability of cementitous building materials
• High resistance to alkaline substrates
• Water-dilutable
• Excellent penetration
• Free from organic solvents
• Low flow tendency

VARIPHOB® CC 4272 is especially recommended for the surface protection of the following mineral based surfaces.

• Cement-based construction materials
• Concrete (non-load bearing manufactured concrete products)
• Reinforced concrete in bridge, road and building construction
• Alkaline mineral substrates

• VARIPHOB® CC 4272 is added undiluted in the airless procedure or can be applied with a roller, brush or spatula.
• Because of the thixotropic character VARIPHOB® CC 4272 can be applied in thicker coats.
• The optimal amount has to be determined in pre-trials.
• Soilings are to be removed prior to applying the product. The ground must be dry, solid and free from dust and grease.
• The efficiency and penetration depth of VARIPHOB® CC 4272 is depending on the moisture of the substrate.
• Water spots or individual moist spots on the concrete surface lead to an uneven impregnation. Water or rain may not get in contact with the cream until VARIPHOB® CC 4272 has been completely absorbed by the ground. Freshly treated surfaces must be protected from water impact.
• When used in combination with insulating materials, the stability of the insulating material to VARIPHOB® CC 4272 must be tested.

In closed original containers at room temperature (approx. 23°C) the product will be stable for at least 12 months.

• VARIPHOB® CC 4272 is sensitive to frost; after the impact of temperatures below the freezing point irreversible changes can occur.
• The containers must be protected from direct sun radiation and keep from temperatures higher than 30°C.