Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Coating Type
- Application
- Coatings, Adhesives & Inks: Will improve adhesion to all metals with accompanying improved salt fog resistance, reduction of creep at the scribe, and reduced blistering; AND improved adhesion to ceramics, concrete and wood and plastics (except untreated PP/ PE). In WB Exterior primers and deck stains, will eliminate peeling on wood substrate.
- Water-Borne Coatings: For acrylic, styrenated acrylic, PUD and alkyd coatings having pH 7-11. Use level 0.35 - 1.4 wt per cent on polymer solids*.
- 2K Epoxy and 2K Urethane: Always add to hardener (epoxies) or polyol (urethanes). Use level 0.35 - 1.4 wt. per cent on polymer solids*.
- Urethane modified nitrocellulose: Add with Cowles-type mixing for 10 minutes. Use level 0.35 - 1.4 wt per cent based upon binder solids.
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Active Matter Content 51 wt% - Complexed Organics 19.6 - 20.4 - - Specific Gravity 1.31 g/ml - pH Value (1% Solution) 7.7 - - Total Metal Content 7.3 - 7.9 % - Neutralizing Agent Caustic - - Organofunctionality Amino - -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Procedure
1. Water-Borne: Post add at 0.35 - 1.4 wt% on polymer solids. Mix with conventional paddle-type mixer.
2. 2K Epoxy and 2K Urethane: Optimum performance is achieved when added to the hardener (epoxies) or polyol (urethanes). Product must be high shear mixed with a Cowles type mixer. Milling alone is not sufficient. Use Level 0.35 - 1.4 wt% on polymer solids.