Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Product Highlights
CRT-PTFE150SN is designed for improved EP, load carrying and anti-wear properties in fully formulated and finished coatings and lubricants. Benefits can include energy savings, smoother mechanical operation, extended life, and reduced maintenance costs of the object being coated or lubricated. The PTFE reduces surface to surface contact and will also provide low friction lubrication under boundary conditions.
Applications & Uses
- Markets
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Typical Uses
- Assembly
- Chain and Conveyor Lubricants
- Gear Lubricant
- General Purpose Lubricants
- Penetrating Oils
- Aerosol Lubricants
- Methods of Use
Dilution:
CRT-PTFE150SN can be blended with most oils. In large batch blending, the oil should be heated to ~55⁰C (131⁰F). Stir the CRT-PTFE150SN thoroughly for uniform consistency, after which, combine equal parts of CRT-PTFE150SN and the other carrier(s)/diluents(s) before blending with the balance of the carrier(s)/diluents(s). Agitation or mechanical stirring throughout the blending operation is extremely important. Soft settling of the larger PTFE particles may occur over extended storage. Please agitate or stir to bring these particles back into suspension. Always thoroughly agitate immediately before using the diluted form of CRT-PTFE150SN.
Application:
To start, use CRT-PTFE150SN at one (1) percent PTFE solids by weight in the fully formulated product, or approximately five (5) to seven (7) percent by weight of CRT-PTFE150SN. The final concentration of CRT-PTFE150SN should be chosen for the desired results and/or performance.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Carrier | 150 SUS Solvent Neutral Petroleum Oil | - | - |
| Density | 7.01 - 8.01 | lbs/gal | ASTM D1475 |
| Flash Point | 198.0 | °C | - |
| Hegman Grind | 7.0 - 8.0 | - | ASTM D1210 |
| Lubricating Solids | PTFE | - | - |
| Particle Size | 0.1 - 3.0 | μ | ASTM E2490 - d50 - MIE |
| Solids Content (PTFE) | 20.0 | % | - |
| Viscosity | min. 1500 | cP | ASTM D2196 - Brookfield 6/20 |
Packaging & Availability
- Packaging Type
- Container Size
35 lb. (15.88 kg) 5 gallon pail 400 lb. (181.4 kg) 55 gallon drum 2640 lb. (1197 kg) 330 gallon tote
Storage & Handling
- Storage
Keep container closed when not in use to avoid contamination.