Cerflon Technologies CER-H2O

CER-H2O is formulated with the patented technology of Ceramic Reinforced Technologies which “Ceramically reinforces” the PTFE. This reinforcement significantly increases its durability and application range and the technology also provides improved EP, load carrying and anti-wear properties in fully formulated and finished coatings and lubricants. Benefits can include energy savings, smoother mechanical operation, extended life, and reduced maintenance costs of the object being coated or lubricated. The “reinforced” PTFE reduces surface to surface contact and scuffing while providing reliable low friction lubrication under boundary conditions.

• Release Coatings
• Anywhere PTFE is used
• Anti-Friction Applications
• Fabric Coatings
• Aerosol Lubricants

Dilution:

Stir the CER-H2O thoroughly for uniform consistency, then premix equal parts of CER-H2O and the other carrier(s)/diluents(s) before blending with the balance of the carrier(s)/diluents(s). Agitate consistently by mechanical stirring throughout the blending operation. For evaluation, use CER-H2O at a 1:3 or 1:4 dilution ratio. The final concentration of CER-H2O should be chosen for the desired results and/or performance. A small amount of soft settling of the larger particles may occur during long periods of storage. Mild agitation will restore these particles back into suspension. Always thoroughly agitate immediately before using the diluted form of CER-H2O.

Surface Preparation and Application:

Substrates should be clean and dry before application. Use a solvent wipe or vapor degreasing with air which will be adequate for most applications. Diluted CER-H2O can be applied by spray, brush or dip process.