CENTROMID 6 GF / PA 6 GF 30

CENTROMID 6 GF / PA 6 GF 30 is reinforced with 30% glass-fibers. This leads to stiffness and increased resistance in the composite material and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile strength is increased up to 8.700 MPa. PA 6 GF 30 plastics are often used as track and rope pulleys.

Brand: CENTROMID (8 products)

Polymer Name: Polyamide 6 (PA 6)

Reinforcement Material: Glass Fibers

Color: Black

Physical Form: Plates, Rods, Tube

Density: 1340.0 - 1340.0 kg/m³

Features: High Heat Distortion Temperature, High Tensile Strength, Stiffness

Technical Data Sheet Safety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyamides
Fillers Included: Glass Fiber
Polymer Name: Polyamide 6 (PA 6)
Reinforcement Material: Glass Fibers
Abbreviation: PA 6 GF 30
Designation: Polyamide 6 30 % glass fibre
Type of Polymer: Thermoplastic
Trade Name: CENTROMID 6 GF
Technologies: Composite Materials,
Plastics
Product Families: Composite Materials — Parts & Shapes
Plastics — Parts, Shapes & Films

Features & Benefits

Materials Features: High Heat Distortion Temperature,
High Tensile Strength,
Stiffness

Applications & Uses

Markets

Automotive & Transportation,

Electrical & Electronics,

Applications

Automotive & Transportation — Automotive

Exterior & Body

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts,

Other Industrial Applications

Electrical & Electronics — Other Electrical & Electronics Applications

Plastics & Elastomers End Uses

Field of Use

Automotive industry
Electrical industry
Mechanical engineering
Medical technology
Plastics industry
More industries

Field of Application

Racks
Rollers
Rope pulleys

Properties

Color

Physical Form

Physical Properties


	Value	Units	Test Method / Conditions
Density	1.34	g/cm³	ISO 1183
Moisture Pick-up till Saturation (in normal climate 23 °C / 50% r.h.)	2.1	%	ISO 62
Water Absorption Till Saturation (in water at 23°C)	6.6	%	ISO 62

Mechanical Properties


	Value	Units	Test Method / Conditions
Tensile Stress at Yield [v = 50 mm/min]	120.0	MPa	ISO 527-2
Tensile Modulus of Elasticity	8700.0	MPa	ISO 527-2
Ball Indentation Hardness (value at 30 sec.)	43.0	MPa	ISO 2039-1
Charpy Impact Strength (+23 °C)	min. 50	kJ/m²	ISO 179/1eU
Charpy Impact Strength - notched (+23 °C)	5.0	kJ/m²	ISO 179/1eA

Thermal Properties


	Value	Units	Test Method / Conditions
Temperature For Usage in Air (short term)	max. 180	°C	-
Temperature For usage in Air (lasting)	max. 100	°C	-
Minimum Service Temperature in Air	-20.0	°C	-
Heat Distortion Temperature (HDT A process)	210.0	°C	ISO 75-2
Coefficient of Linear Expansion (at length, 23 - 60 °C)	0.26	10-4/K	ISO 11359
Thermal Conductivity (+23°C)	0.28	W/(K · m)	DIN 52612
Flammability According UL Standard (thickness 3 and 6 mm)	HB	Class	UL 94
Melting Point (DSC, 10 K/min)	220.0	°C	ISO 3146

Electrical Properties


	Value	Units	Test Method / Conditions
Specific Insulation Resistance	min. 10^12	Ohm · m	IEC 60093
Specific Surface Resistance	min. 10^13	Ohm	IEC 60093

Regulatory & Compliance

Food Compliance BfR: No
Food Compliance FDA: No

Packaging & Availability

Stock Lengths: 1,000 | 3,000
Width: 500.0
Tolerance Length: 0 - 3
Tolerance Width: 1 - 4
Rods: 20 - 150
Plates: 10 - 50