Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Surfaces Where Teratone 467 Excels
- High Traffic Areas: TERATONE 467 provides a tough and durable barrier to protect high traffic areas from dirt, spills, and stains.
- Very Porous Surfaces: Porous surfaces absorb stains very easily. TERATONE 467’s protective coating inhibits absorption by porous material.
- Outdoor Surfaces: TERATONE 467 excels against the constant threats faced by outdoor surfaces. TERATONE 467 protects from the effects of weathering, rain, and UV damage.
Applications & Uses
- Markets
- Applications
- Application Area
- Recommended Surfaces
- Travertine
- Brazilian & Spanish Tile
- Unglazed Tile
- Marble
- Stone, Brick, & Clay Pavers
- Exposed Aggregates
- Quarry Tile
- Coverage
- For very porous surfaces: 1st coat: 150-200 sq. ft./gallon. 2nd coat 300-400 sq. ft./gallon.
- For average density surfaces: 1st coat: 250-300 sq. ft./gallon. 2nd coat 400+ sq. ft./gallon.
- For very dense surfaces: 1.5x avg. density coverage. Generally, the sealer will go twice as far on the 2nd coat as it did on the 1st coat. Allow 24 hours between coats.
- Surface Preparation
Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ensure the area is well ventilated. Ideal surface temperature should be between 60° and 80°F. Product works best when it is the first substance applied to the surface, insuring proper penetration.
Clean UP
- Xylene or similar solvent can be used to clean tools.
- Applications
TERATONE 467 may be applied with spray applicator, brush, roller, or lint free rag. Spread evenly and uniformly- cover entire area, leaving no puddles. Avoid puddles by wiping up excess. Allow 24 hours between coats to ensure it has dried completely. No buffing required.
- Smooth Surfaces: apply TERATONE with a lint free cloth or short nap roller.
- Rough Surfaces: apply with a ½ to ¾ inch nap paint roller or paint brush.
Safety & Health
- First Aid Measures
- Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.
- Skin Contact: Remove contaminated clothing. Wash with soap and water. Seek medical attention if irritation persists.
- Inhalation: If inhaled, remove to fresh air. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. In case of unconsciousness place patient stably in side position for transportation.
- Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.
Packaging & Availability
- Packaging Information
- 1 qt: 12 units per case (28lbs)
- 1 gallon, 6 units per case (45lbs)
- 5 gallon, (40lbs)
- 55 gallon, (445lbs)
Storage & Handling
- Storage Conditions
- Caution: Highly flammable & combustible liquid and vapor. Do not handle until all safety precautions have been read and understood.
- Handling: Do not get in eyes, on skin, or on clothing. Do not breathe vapors or mists. Keep container closed and tightly sealed when not in use. Keep away from sources of ignition - No smoking. Take measures to prevent the buildup of electrostatic charge.
- Conditions for safe storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.
- Materials to avoid: Do not store with the following product types: Strong oxidizing agents, Explosives, Gasses.