HYDRODIS ADW 3814 N

Hydrodis ADW 3814 N is a dispersing agent for detergency application.

Brand: HYDRODIS (2 products)

Functions: Chelating Agent, Dispersant

pH: 7.0 - 7.0

End Uses: Detergents

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Cleaning Ingredients Functions
Technologies
Product Families
General data from Detergents Ingredients Database (Version 2007)

DID list number: 119 Name of the ingredient: Mix of phosphonic derivates.

Composition

Mixture of neutralized Phosphonic Acids

Features & Benefits

HII Features
Biodegradability

HYDRODIS ADW 3814 N doesn't contain any surfactants and the test for biodegradability of surfactants is not applicable.

Applications & Uses

Markets
Applications
I&I Cleaning Applications
Application

The recommended amount to be used for industrial formulates is between 10% and 14%. The dosage range is basis the information collected upon application testing in the laboratory and feed back from our Customers.

  • Adjusts and inhibits the precipitation of the calcium carbonate
  • Good sequestering power.
  • Dispersing action on the inorganic precipitates and soils in solution.
  • Acts as a cohadjuvant in soils removal.

Properties

Physical Form
Appearance
Amber-coloured, limpid liquid
Soluble in
Water
Typical Properties
ValueUnitsTest Method / Conditions
Active Acid25.0%-
Density (20°C)1.33g/cm3-
Dry matter (105°C)41.0%-
pH Value7.0--
Phosphorus Content6.3%-
Sequestering power (Caco3/g)225.0mg-

Regulatory & Compliance

Products and Mixtures Restricted or Prohibited

HYDRODIS ADW 3814 N satisfies the criteria as cited in Art. 3 of European Commission regulation no. 2011/382/UE and 2011/383/UE because the listed substances are not used in the manufacturing cycle of HYDRODIS ADW 3814 N.

Storage & Handling

Storage

Storage: Very good in normal room conditions, at temperatures lower than 0°C crystals may occur, however they can be easily dissolved by brief heating and stirring.

Materials for Storage

  • mild steel - not suitable
  • inox 316 - suitable
  • polyethylene - suitable