Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- High bond strength
- High elongation
- Low color
- Low neat viscosity
- Exhibits hydrolytic stability
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Coating Type
- Applications
- Primer coatings
- Glass coatings
- Adhesives
Properties
- Typical Properties
Value Units Test Method / Conditions Fluorescing Blue - - Rheology Newtonian - - - Cured Properties
Value Units Test Method / Conditions Durometer Hardness D65 - - Elongation at Break 225.0 % - Glass Transition Temperature (Tg) -47.0 °C - Modulus of Elasticity 175.8 [25,500] MPa (psi) - Nominal Viscosity 450.0 cP - Tensile at Break 15.8 [2,300] MPa (psi) - - Uncured Properties
Value Units Test Method / Conditions Density (25°C) 1.03 g/cm³ - Pt-Co Color (APHA) 10.0 - - Refractive Index (25°C) 1.466 - - Viscosity 11000.0 cP (at 20 rpm) - Viscosity at 25°C 15000.0 cP -
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS X X XXX X XX X Aluminum XXX X X Cold Rolled Steel
X X X XX X Glass X X X HDPE X PET X X XX XX X PMMA XX X XXX X XXX Polycarbonate X X X XXX XXX X Polypropylene X XX PVC XX XXX X Stainless Steel X X XXX X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 2,100 600 2,300 700 400 1,600 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
90 150 1,700 1,000 1,400 120 Elongation, 6** 120 190 3 15 8 200 Elastic Modulus, ksi*
0.13 0 65 20 30 0 Durometer Hardness
39A 51A 75D 45D 55D 30A Water Absorption, 96 (24 hrs)
1.56 1.03 1.64 1.46 0.89 7 MEK Double Rubs (#)
3 6 128 8 17 32 Tg(DMA)=-47°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.