Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Cure Methods and Times
Lining is cured. No additional curing is required.
- Applicator Notes
- This is a neoprene rubber repair material for any neoprene rubber lined vessel.
- When repair includes bonding to metal, buff or sand blast surface. Buff old adhered rubber to a smooth taper to prepare for inlay.
- Another option for large repairs is to overlay the seam using the butt cap method. Roll and stitch down the cap strip.
- Do not attempt to stretch rubber into position. Rubber will not stretch without returning to its original shape. Care must be taken to ensure surfaces are flat or gently sloping in order for rubber to conform to surface shape.
- No heat is required as long as ambient temperatures are greater than 50°F (10°C). Bond strength will be achieved in 24-48 hours.
- The temperature of the substrate must be greater than 60°F (15°C) prior to applying primer and rubber. Temperature should not exceed 120°F (49°C).
- Tack time is critical to the success of the bond. Adhesive specifications must be followed.
Properties
- Color
- Physical Form
- Typical Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Adhesion to Metal | 25.0 | lbs. | ASTM D429 |
Durometer | 60.0 | A | ASTM D2240 |
Elongation at Break | 450.0 | % | ASTM D412 |
Specific Gravity | 1.33 | - | ASTM D297 |
Tensile Strength | 2000.0 | psi | ASTM D412 |
Value | Units | Test Method / Conditions | |
Face Material Durometer, Atmospheric Cure | 55-65 | A | - |
Skive | Open or Butt & Cap | - | - |
Technical Details & Test Data
- Adhesive System
1st coat on metal: P-100 2nd coat on metal: Normac™ 900E Ultra with Hardener
3rd coat on metal: Normac™ 900E Ultra with Hardener
On the rubber: Normac™ 900E Ultra with Hardener
Each adhesive component requires thorough mixing before application.
Alternate Adhesive System 1 coat on metal Endurabond RC
Packaging & Availability
- Available Gauges
1/8”, 3/16”, 1/4”, 3mm, 4mm, 5mm, 6mm
Storage & Handling
- Storage Life From Date of Shipment
10 years