Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Ingredients
Active Ingredient(s)
- Peroxyacetic Acid - 5.3%
- Hydrogen peroxide- 22.5%
Other Ingredient(s)
- Acetic Acid
- Water
- Stabilizer
DOT Classification
- UN 3098 Oxidizing liquid
- corrosive, n.o.s (peroxyacetic acid) 5.1 (8)
- PGII
EPA Registration No. 91628-1
Features & Benefits
- HII Features
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Features and Benefits
• OXYSAN Acid Sanitizer is registered by the EPA for use in the USA.
• Rapidly sanitizes at a range of temperatures.
• Use at low concentrations for broad-spectrum kill of gram-positive and gram-negative bacteria.
• May be foamed onto surfaces with the addition of Bio Foam additive to provide added cling and penetration time. Can also be fogged.- Uses
Directions for Use
Pump
Teflon diaphragms and Teflon, polypropylene, or kynar liquid contacting points.Double seated check valve and de-gassing head. Do not use elastomer composite material for seats or gaskets other than Teflon.Peristaltic pumps can be used. – Santoprene squeeze tubes. Check integrity of squeeze tubes regularly.
Tubing
Teflon Tubing is preferred. FEP or PFA Teflon tubing has good pressure and wear resistance, and is UV and weather resistant. Low density polyethylene tubing is not recommended. High density polyethylene has relatively good resistance but will become brittle with time. Never use any synthetic tubing other than those discussed above
Metals
Never use brass, copper, iron, or galvanized metal of any kind that will contact even the most dilute solution of OXYSAN Acid Sanitizer.
Properties
- Physical Form
- Odor
- Pungent, Vinegar Like
- Miscible in
- Completely Miscible (100%)
- Specifications
Value Units Test Method / Conditions Flash Point min. 100 - - pH 0.2 - 0.8 - - Vapor Pressure 27.0 - - Relative Density (25°C) 1.126 - - Freezing Point -49.0 °C - Weight Per Gallon 9.45 lbs./gal -
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Part Numbers
5320 1 gal 5321 5 gal 5322 15 gal 5323 55 gal 5324 265 gal
Storage & Handling
- Storage and Handling
Store product in original container, in an upright position. The storage area should be well ventilated and shaded from sunlight as well as protected from sources of radiant heat. Contamination of the product, especially heavy metal ions and alkali, must be avoided. Do not store near reducing agents, fuels, organic material, or other noncompatible materials. Avoid temperatures above 86 F. Use first in, first out storage management. Containers must be vented. Shelf life is at least one year without notable loss of active oxygen if stored properly.
ALWAYS wear gloves, goggles or face shield, and other appropriate chemical resistant gear.