APOC® 290 SECURE PRIME™ SELF-ADHERED MEMBRANE PRIMER

• Improves Adhesion of Self Adhered Membranes
• Improves Long Term System Performance
• Quick Dry Water Based Formula

Surfaces with mildew growth or stains must be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying this product. Rinse thoroughly. Surfaces previously coated with aluminum should be allowed to cure for a minimum of one summer season prior to coating with this product.

For Best Results : Ensure product is thoroughly dry prior to application of SA membrane or coatings

For exterior use only.

• Protective clothing, gloves, and eyewear should be used during application of this product.
• Always apply on a clear, warm sunny day.
• Apply in morning hours to allow maximum cure time.
• Temperatures must be above 50 °F (for 24 hours) and rising, but not above 110 °F. Drying conditions are rated at a maximum relative humidity of 50%.
• Apply with a 1/4” nap exterior paint roller or professional airless sprayer.
• Allow to cure for 2 - 4 hours at 77 °F & 50% relative humidity. Higher humidity, thicker films, poor air flow and lower temperatures will increase dry times.
• Coverage rate is approximately 1 gallon per 300 - 400 square feet.

Clean-up: Clean tools with soap and water.

(Note: All approx. weights include container)