Products

MicrOring® Seals CR is an early developed, oil-resistant substitute for natural rubber, Neoprene features moderate resistance to petroleum oils, good resistance to ozone, sunlight and oxygen aging, relatively low compression set, good resilience, reasonable cost, and high resistance to attack by Freon® and ammonia.

MicrOring® Seals BN is presently the seal industry’s most widely used elastomer. Nitrile combines excellent resistance to petroleum-based oils and fuels, silicone greases, hydraulic fluids, water and alcohols. It has a good balance of such desirable working properties as low compression set, high tensile strength and high abrasion resistance.

ExpresSeal® Polyurethane (Red) (FDA Compliant) is used in Hydraulic applications where water based fluids are being used.

MicrOring® Seals VT combines high-temperature toughness with wide chemical agent compatibility, Fluorocarbon compounds feature excellent resistance to petroleum products and solvents and good high-temperature compression set characteristics.

MicrOring® Seals FS combines the good high and low temperature stability of Silicones with the fuel, oil and solvent resistance of fluorocarbons. FS compounds feature good compression set and resilience properties. FS compounds are suitable for exposure to air, sunlight, ozone, chlorinated and aromatic hydrocarbons.

MicrOring® Seals SL is resistant to high, dry heat in primarily static applications. Silicones are fungus resistant, odorless, tasteless, non-toxic elastomers and possess high-resistance to the aging effects of both sunlight and ozone attack.

ExpresSeal® Bronze Filled Teflon® (Brown) - BTFE has better wear, creep resistance and higher thermal conductivity than virgin and glass fiber filled PTFE. Poor chemical resistance in the presence of acids and alkali.

ExpresSeal® Virgin Teflon® (White) - PTFE (Polytetrafluoroethylene) has excellent temperature range. Chemically inert to virtually all industrial chemicals, even at elevated temperatures.

ExpresSeal® Carbon Filled Teflon® (Black) - CTFE good chemical resistance to corrosive environments. Exhibits good initial wear and rubbing characteristics, both dry and water applications.

ExpresSeal® EPDM (Black) (Ethylene-Propylene-Diene Rubber) has good resistance to steam, ozone and direct sunlight. ExpresSeal® EPDM (Black) (Ethylene-Propylene-Diene Rubber) has good Flexibility at lower temperatures, Poor resistance to mineral oil, gasoline and hydrocarbon solvents.

ExpresSeal® H-NBR (Green) H-NBR is a hydrogenated nitrile butadiene rubber compound. Strongest compound of all the elastomers.

ExpresSeal® POM (White or Black) (Polyoxymethelene/Polyacetal) (Hard Plastics)Used for sealing components such as back-up rings and special shapes. » Low absorption of water (low swelling) and strong mechanical properties make this material ideal for bearings and guide-rings.

MicrOring® Seals EP Features good resistance to such polar solvents as ketones (MEK & Acetone). EPM/EPDM is also highly recommended for effective resistance to steam (to 400°F), hot water, silicone oils and greases, dilute acids and alkalies, alcohols and automotive brake fluids. Properly compounded, ethylene propylene can provide extended temperature range of -76°F to +350°F.

ExpresSeal® Nickel Teflon® (Gray) - NTFE (Nickel/Moly/Glass Filled Teflon) has advanced physical and chemical properties with better creep behavior than virgin PTFE.

ExpresSeal® NBR (Black) (Nitrile Butadiene Rubber) has good abrasion resistance. elastic, allowing for ease of installation. used for hydraulic and pneumatic applications.