Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Materials Features
- Performance Highlights
UCECOAT® 7230 is characterized by:
- High reactivity
- Low tack after water evaporation and before UV curing
- Good substrate wetting
- Good compatibility with other waterborne resins
- Good colloidal stability
UV/EB cured films based on UCECOAT® 7230 are characterized by the following performances:
- Very high hardness
- High gloss
- Good adhesion on plastics such as PC, ABS, PC, ABS
- Excellent abrasion resistance.
- Excellent chemical resistance.
- Good orientation of metallic flake pigment
Low yellowing The actual properties of UV cured films also depend on the selection of the other formulation components
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Recommended Uses & Known Applications
Formulated UV curable products containing UCECOAT® 7230 may be applied by spray, curtain, T-bar as well as several roll coating methods.
UCECOAT® 7230 is recommended for use in:
- Clear topcoat for plastics and wood applications
- Metallic and pigmented mono-coats
- Inks
Properties
- Appearance
- Milky emulsion
- Typical Properties
Value Units Test Method / Conditions MFFT max. 10 °C - Density (25°C) 1.05 g/ml - Particle Size max. 150 nm - Solids Content 40.5 - 43.5 wt% - pH Value 6.0-8.0 - - Viscosity (25°C) max. 200 cP/mPa·s -
Safety & Health
- Precautions
Before using UCECOAT® 7230, see the Safety Data Sheet for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
See the SDS for the recommended storage temperature range for UCECOAT® 7230.