Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Cure Method
- Coating Type
- Suggested Applications
EBECRYL® P39 is recommended for use in over print varnishes where low residualodor is required.
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties
Value Units Test Method / Conditions Density 1.19 g/ml - - Typical Properties
Value Units Test Method / Conditions Acid Value max. 5 mgKOH/g - Color max. 8 Gardner - Viscosity (25°C) 7000-11000 cP/mPa·s -
Safety & Health
- Precaution
- Before using EBECRYL® P39, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL P39. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.Acid Value, mg KOH/g, max. Viscosity, 25°C, cP/mPa·s 7000-110