Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

EBECRYL® 740/40 TP

EBECRYL® 740/40 TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is specifically designed to enhance adhesion to challenging substrates. It is recommended for use in various applications, including silk screen inks and coatings on plastics, adhesives, and inks for difficult substrates like untreated polyester, polypropylene, and polystyrene. The end uses of EBECRYL® 740/40 TP include radiation-curable coatings. The features of this product include faster cycle time, long pot life, low energy consumption, and low-temperature curing. Additionally, it is labeled as bisphenol A-free, low carbon footprint (PCF), solvent-free, and VOC-free.

Brand: EBECRYL (314 products)

Chemical Family: Acrylics & Acrylates

End Uses: Radiation Curable Coating

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Acrylics & Acrylates
CASE Ingredients Functions
Oligomer
Technologies
CASE Ingredients
Product Families
CASE Ingredients — Monomers & Intermediates
Oligomers

Features & Benefits

Labeling Claims
Bisphenol A-free,
Low Carbon Footprint (PCF),
Solvent-free,
VOC-free
CASE Ingredients Features
Faster Cycle Time,
Long Potlife,
Low Energy Consumption,
Low Temperature-Curing

Applications & Uses

Markets
Paints & Coatings,
Printing & Packaging
Applications
Paints & Coatings — Building & Construction
Wood Coatings & Finishes
Paints & Coatings — Industrial Coatings
Furniture Coatings,
Industrial Coatings
Printing & Packaging — Packaging Coatings
Other Packaging Coatings
Paints & Coatings — Packaging Coatings
Other Packaging Coatings
Paints & Coatings — Specialty Coatings
Other Specialty Coatings
Application Method
Curtain Coating,
Gravure Coating,
Roller
Compatible Substrates & Surfaces
Plastics,
Wood
Cure Method
Radiation Cure
Coating Type
Radiation Curable Coating
Suggested Applications

Formulated UV/EB curable products containing EBECRYL® 740/40TP may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods.

EBECRYL® 740/40TP is recommended for use in :
  • Silk screen inks and coatings on plastics
  • Adhesives and inks for difficult substrates, such as untreatedpolyester, polypropylene, polystyrene, etc.
  • Adhesion promoting adhesives.

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Density1.05g/cm³-
Polymer Solids Content60% wt-
TPGDA40% wt-
Typical Properties
ValueUnitsTest Method / Conditions
Colormax. 3Gardner-
Hoppler Viscosity (60°C)6000-9000mPa.s-

Safety & Health

Precaution
The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details.The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.See Safety Data Sheet for emergency and first aid procedures.

Packaging & Availability

Regional Availability
  • Africa
  • Europe
  • Middle East