Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

BECKOPOX™ EH 2162W/75WA

BECKOPOX™ EH 2162W/75WA is a liquid hardening agent designed for the building and construction sectors. Specifically formulated for building envelope and roofing applications, including EIFS and insulation, it functions effectively with waterborne coatings on metal substrates and is categorized under CASE Ingredients functional additives.

Brand: BECKOPOX (54 products)

Functions: Hardener

End Uses: Waterborne Coating

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

CASE Ingredients Functions
Hardener
Technologies
CASE Ingredients
Product Families
CASE Ingredients — Additives
Functional Additives

Features & Benefits

Distinguishing Features
  • BECKOPOX™ EH 2162W is a hardener for concrete coatings with lower viscosity and longer pot-life use time than the standard hardener for concrete coatings BECKOPOX™ EH 623w. The pot-life extension is particularly when formulated at lower VOC levels and used in combination with liquid EP-resins.
  • BECKOPOX™ EH 2162W is lower in reactivity compared to BECKOPOX™ EH 613w.

Applications & Uses

Markets
Building & Construction
Applications
Building & Construction — Building Envelope & Roofing
EIFS & Insulation
Compatible Substrates & Surfaces
Metal
Coating Type
Waterborne Coating
Special Properties and Uses

Hardener for water-reducible coatings on mineral and metallic substrates.

Processing Information
  • BECKOPOX™ EH 2162W is used in combination with the water emulsifiable liquid resins BECKOPOX™ EP 122w, EP 147w and other liquid resins such as BECKOPOX™ EP 140, EP 128 and the solid resin dispersions BECKOPOX™ EP 384w and EP 2384w (preferably in combination with liquid EP-resins) to produce water-thinnable paints hardening at room temperature.
  • Drying at elevated temperatures (>60°C) should be avoided. At such conditions traces of acrylonitrile will be released.
  • When pigments and fillers are being dispersed in the hardener, the temperature must not be allowed to rise above 40°C.

MIXING RATIO AND POT LIFE

A blend of 100.0g BECKOPOX™ EP 147w and 116.5 g BECKOPOX™ EH 2162W has a processing time at 23°C of approx. 3 hours. The termination point cannot be visually seen through viscosity increase or gelation. Therefore it is necessary to use the material within the stated time limit.

Properties

Physical Form
Liquid
Typical Properties
ValueUnitsTest Method / Conditions
Non-Volatile Matter73 - 77%-
Iodine Color Numbermax. 10--
Density (20°C)approx 1.1g/cm³-
Dynamic Viscosity (50 s⁻¹, 25°C)1900 - 7200--
H-Equivalent-Weight (Solid Matter)169g/mol-
H-Equivalent-Weight (Form of Delivery)225g/mol-
Flash Point (Pensky-Martens)min. 100°C-
Amine Value (Form of Delivery)160 - 210mg KOH/g-
pH Value44875--

Storage & Handling

Shelf Life
1 Year
Storage and Handling
  • At temperatures up to 25°C storage stability packed in original containers amounts to at least 365 days.
  • Synthetic resins containing water may freeze or get inhomogeneous at temperatures below 0°C. By this the product will not suffer any damage, but the necessary regeneration requires extended heat treatment at 40-50°C with continuous stirring. It is therefore recommended to ensure frostproof storage of such products.
  • Lowest storage temperature: - 15°C
  • When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.