Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Particle Type
Small, round particles
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Fluids & Lubricants Features
Applications & Uses
- Markets
- Applications
- Fluids & Lubricants Type
- Micropowder Application Areas
Primary Usage
- Oils & Greases
- Coatings
Secondary Usage
- Aerosols & Solvents
- Inks
Properties
- Typical Properties
Value Units Test Method / Conditions Bulk Density 385 - ASTM D-4894 FDA Compliance CFR 177.1550 - CFR Number Melting Point 500 (260) ºF (ºC) ASTM D-3417 Moisture Content max. 0.1 % ASTM D-4019 Oil Absorption 79 lb oil / 100 lb ASTM D-1438 Oil Penetrometer 68 1/10 mm ASTM D-1403 Particle Size 3 microns Hegman ASTM D-1210 Particle Size – Low Shear (Average) 14 μm Laser Diffraction Particle Size – Low Shear (D10) 3.5 μm - Particle Size – Low Shear (D90) 34 μm - Surface Area 7.6 m²/g AGC Chemicals Americas Volatile Content 0.17 % AGC Chemicals Americas - Particle Smear Sensitivity
Size reduction possible upon mixing
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
- Physical hazards: None
- Health hazards: None
Packaging & Availability
- Packaging Type
- Packaging
TL-120 is supplied in 100 lbs blue poly drum.
Storage & Handling
- Storage
Drums of TL-120 should be stored in cool, dry condiions prior to use.
- Handling Precautions
- Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
- Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.