Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- CASE Ingredients Functions
- Fluids & Lubricants Functions
- Plastics & Elastomers Functions
- CAS No.
- 9002-84-0
- EC No.
- 618-337-2
- Technologies
- Product Families
- Particle Type
Soft, round sub-micron particles in clusters
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Fluids & Lubricants Features
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Plastics & Elastomers End Uses
- Micropowder Application Areas
Primary Usage
- Dry Lubricants
- Aerosols & Solvents
- Oils & Greases
- Elastomers
Secondary Usage
- Thermoplastics
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Bulk Density 400 grams/liter ASTM D-4894 Melting Point 633 (334) ºF (ºC) ASTM D-3417 Moisture Content max. 0.1 % ASTM D-4019 Oil Absorption 45 lb oil / 100 lb ASTM D-1438 Oil Penetrometer 99 1/10 mm ASTM D-1403 Particle Size 3 microns Hegman ASTM D-1210 Particle Size – Low Shear 5 μm Laser Diffraction Particle Size (D10) 5 μm - Particle Size (D90) 25 μm - Surface Area 2.3 m²/g Krypton adsorption - Particle Smear Sensitivity
Cluster break-up to smaller size upon mixing
Regulatory & Compliance
- Certifications & Compliance
- FDA Compliance
CFR 175.300, CFR 177.1550
Safety & Health
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
- Physical hazards: None
- Health hazards: None
Packaging & Availability
- Packaging Type
- Packaging
FL1710Z is supplied in 25 kg laminated fiber board kegs.
Storage & Handling
- Storage
The powder is contained within two polythene liners, individually sealed. Kegs of FL1710Z should be stored in cool, dry condiions prior to use.
- Handling Precautions
- Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
- Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.