Fluon - ETFE C88AXMP-HT - AGC Chemicals - ETFE Copolymer

Enhanced TDS

Flame Rating

UL 94 V0

Physical Form

Pellets,

Typical Properties


	Value	Units	Test Method / Conditions
Elongation to Break (at 23 ºC)	min. 300	%	D638
Maximum Continuous Service Temperatre	175 – 200*	ºC	-
Melting Point	254	ºC	D3418
MFR	23 - 35	g/10mins	D3159
Specific Gravity	1.73	-	D792
Tensile Strength (at 23 ºC)	min. 40	MPa	D638
UL94 Standard Rating	V-0	-	UL94

Certifications & Compliance: UL 94
Food Contact Approval: Information on food contact approval is available from the AGC Chemicals Europe, Ltd Sales Office.

Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to accept responsibility in respect of factors which are outside our knowledge or control. All conditions, warranties and liabilities of any kind relating to such information, expressed or implied, whether arising under statute, tort or otherwise are excluded to the fullest extent permissible in law. The user is reminded that his legal responsibility may extend beyond compliance with the information provided. Freedom under patents, copyright and registered designs cannot be assumed.

Fluon® grades are general industrial grades. It is the responsibility of the purchaser to check that the specification is appropriate for any individual application. Particular care is required for special applications such as pharmaceutical, medical devices or food. Not all grades are suitable for making finished materials and articles for use in contact with foodstuffs. It is advisable to contact the AGC Chemicals Europe, Ltd sales office for the latest position. Users of Fluon® are advised to consult the relevant Health and Safety literature which is available from the AGC Chemicals Europe, Ltd sales office. Fluon® is a registered trademark of the Asahi Glass Company.

Packaging: Fluon® ETFE C88AXMP-HT made in the UK is packed in polyethylene bags containing 20 kg.

Storage and Handling: Fluon® ETFE C88AXMP-HT should be stored in clean, dry conditions. No special treatment is required. Any partially used sacks should be resealed to prevent ingress of contamination. The resin will not absorb water. If the resin is brought into a warm work place, from a colder store, it should not be opened until it has reached the temperature of the work place – this will prevent potential condensation forming on the pellets.