Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- PRODUCT BENEFITS
- Temperature range: -320°F to +500°F
- Exceptional dielectric insulation properties
- Negligible moisture absorption
- Low coefficient of friction
- Non-stick surface
- Very low gas permeation and outgassing
- May be welded with hot air welding equipment
- Chemically inert to all industrial chemicals and solvents
- High resistance to outdoor weathering
- Does not support combustion
- Low metals and ion extractables
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- TYPICAL APPLICATIONS
- Pump housings and pipe linings
- Fluid handling or chemical processing equipment
- Wet bench equipment
- Tanks
- Semiconductor wafer carriers
- Hostile environments involving chemical, thermal, and mechanical stress
- Food processing and packing equipment
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Melt Flow Rate 1.5-2.5 g/10 min D3307 Durometer Hardness 60 Shore D ASTM D 2240 Specific Gravity 2.12-2.17 g/cm3 D3307 Water Absorption (24) max. 0.01 % D570 Tensile Strength (23°) 4350 psi D3307 Elongation (23°) 300 % D3307 Compressive Strength (25°) 725-870 psi D695 Impact Strength (23°C, Notched Izod) No Break J/m D256 Flexural Modulus (23°) 84,000-100,000 psi D790 Coefficient of Friction 0.04-0.05 - D621 Deformation Under Load (25°C, 1987) 8-9 % D3307 - Thermal Properties
Value Units Test Method / Conditions Melting Point, Nominal 300-310 °C D696 Thermal Expansion (21°C to 100°C) 12 x 10-5 mm/mm/°C D2863 Oxygen Index min.95 % UL 94 Maximum Service Temperature 260 °C D257 Flammability V-0 - D149 - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity 10^18 ohm-sq D150 Dielectric Strength Short Time (.125in) 500-600 Volts/mil D150 Dielectric Constant (23°C, 10^6) 2.1 - - Dissipation Factor (23°C, 10^6) 0.003 - -
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- COMPLIANCES
- ASTM D 3307 Type II
- 3A Sanitary Standard 20-17
- USP Class VI
- USDA and FDA compliant CFR-177.1550