AFT Fluorotec AF201 Carbon Filled PTFE

AFT Fluorotec AF201 Carbon Filled PTFE is the addition of carbon to PTFE increases the compressive strength and wear resistance. It provides good thermal conductivity and low permeability. Commonly used in sealing applications.

Polymer Name: Polytetrafluoroethylene (PTFE)

Fillers Included: Carbon Powder

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Fluoropolymers
Fillers Included: Carbon Powder
Polymer Name: Polytetrafluoroethylene (PTFE)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Chemical Resistant,
Conductive,
Cost Effective,
Electrically Conductive,
Excellent Elasticity,
Good Compressive Strength,
Good Thermal Conductivity,
Low Elongation,
Wear Resistant

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics,
Food & Nutrition,
Healthcare & Pharma,
Industrial
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Cooling & Climate,
Fuel Systems
Building & Construction — Building Materials
Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts,
Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
Automotive Electronics
Healthcare & Pharma — Medical
Laboratory & Diagnostics,
Medical Devices & Assemblies,
Other Medical Applications,
Surgical Instruments & Trays
Food & Nutrition — Other Food & Nutrition Applications
Electrical & Electronics — Parts & Components
Connectors,
Other Parts & Components
Electrical & Electronics — Wire & Cable
Jacketing & Insulation
Plastics & Elastomers End Uses: Bearings,
Conveyors,
Filters,
Gaskets,
Labware,
Machine/Mechanical Parts,
Medical Devices,
Medical/Healthcare Applications,
Pump Parts,
Surgical Instruments,
Valve Parts

Properties

Physical Properties


	Value	Units	Test Method / Conditions
Specific Gravity	2.05 – 2.12	g/cm3	ASTM D 792
Tensile Strength	20-30	MPa	ASTM D 4894
Elongation	90 - 300	%	ASTM D 4894
Shore D Hardness	60 - 66	-	ASTM D 2240
Deformation Under Load	5 – 7	%	ASTM D 695
Permanent Deformation	2 – 4	%	ASTM D 695
Flexural Modulus	1105.0	MPa	-
Coefficient of Static Friction	0.14 – 0.16	-	-
Coefficient of Dynamic Friction	0.12 – 0.14	-	-
Volume Resistivity	10^-4	Ohm / CM	ASTM D 257
Service Temperature	-200 /+260	°C	-