ATP® 361

• Effective temperature range 1800-2200⁰F (982-1204⁰C)
• Controls hydrogen penetration
• Controls alpha case development
• Provides heat distribution & metal movement
• Demonstrates exceptional green strength upon proper drying to withstand cracking, chipping, peeling, etc.
• Excellent paintability; formulated for brushing application (can be adjusted for dipping or spraying by diluting with water, do not thin coating too much)

• Thoroughly suspend and mix before use
• Metal surfaces must be free of dirt, oil, grease, metal oxides, and other materials
• Coating thickness depends on the time and temperature of exposure (generally, the higher the temperature and longer exposure, the thicker the coating should be applied)
• A wet film thickness of 7 ± 3 mL should be optimal
• Ensure bottom coat is thoroughly dried when applying multiple coats
• Water-based coatings need ample time to completely dry before entering furnace (can be applied over preheated substrate to accelerate drying time)

No chemical should be used as or in a food, drug, medical device, or cosmetic, or in a product or process in which it may contact a food, drug, medical device, or cosmetic until the laser has determined the suitability and legality of the use. Since government regulations and use conditions are subject to change, it is the user’s responsibility to determine that this information is appropriate and suitable under current, applicable laws and regulations.

ATP-361 should be stored indoors in the original unopened and undamaged container, in a dry place at a temperature not exceeding 85⁰F (30⁰C). Exposure to direct sunlight should be avoided.