Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Backing Material Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Attributes
- Non-migratory, inert acrylic adhesive
- Easily die cut
- Tolerant to Gamma sterilization
- Allows lateral flow in membrane based devices
- Increased visibility
- Compatible with many assays
Applications & Uses
- Markets
- Applications
- Application Area
- For Best Results
- The surfaces you wish to bond should be clean and free of oil, moisture and dust. If the surface temperature is below 40°F, it may be difficult to achieve a proper bond.
- Do not use a pressure-sensitive adhesive product where it will be exposed to temperatures lower or higher than those designated for each product. Heat can destroy the effectiveness of the bond and extreme cold can cause the adhesive to harden and not adhere properly.
- When the tape is applied, use firm hand or lamination pressure to achieve contact between the adhesive and the surface to which it is applied. Hand rollers or nip rollers may be needed for certain products or applications.
Consult your AR sales representative if you need additional information.
- Applications
The typical uses for this product are bonding, laminating and assembly of in-vitro diagnostic and related membrane-based immunoassay products.
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Peel Adhesion on Stainless Steel 28.0 N/25mm 180 degrees, 12 ipm, 5 min. dwell Recommended Storage of Unconverted Product (50% ± 20% RH ) 21 ± 11 °C - Peel Adhesion on Stainless Steel (180 degrees, 12 ipm, 5 min. dwell) 28 N/25mm -
Technical Details & Test Data
- Product Construction
Typical Values Description Backing thickness 5.0 mil 127 μm White polyester film Adhesive thickness 1.2 mil 30 μm AS-110, acrylic adhesive Liner thickness 2.0 mil 50 μm Siliconized polyester release film Total thickness 6.2 mil 157 μm Excluding liners - Note
- All stated values are nominal and should only be used as a guide for selection. They are not specifications. The information contained on this data sheet is based upon test results of limited quantities of this material and may be modified by Adhesives Research following additional production experience and evaluation. This data should not be used in preparing specifications. Products identified as developmental may be subject to modification by Adhesives Research, Inc.
Safety & Health
- Safety Data
- AS-110 is a medical grade adhesive. The adhesive passed cytotoxicity and primary skin irritation tests conducted by an independent laboratory. Additional safety information is available upon request.
Storage & Handling
- Shelf Life
- 2 Year
- Shelf life of Unconverted product
- Not to exceed two years from date of manufacture
- Storage of Pressure-Sensitive Adhesive Tapes
- Pressure-sensitive adhesive tapes function as a mechanical product however, the adhesive itself is a chemical composition that can be sensitive to environmental conditions. A purchaser of pressure-sensitive adhesive products should be aware of the shelf life of each product and not purchase more than it can use before the expiration date. Shipping and storage conditions affect shelf life. The optimum storage temperature is 70 °F (21 °C). Cool, dry storage is recommended.
- Recommended Storage of Unconverted Product
- 21 ± 11 °C (50% ± 20% RH)