Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Attributes
- Compatible with PCR reagents
- Low auto-fluorescence
- Outstanding high/low temperature performance: 450°F (232°C) to -80°F (-62°C)
- Excellent bond to low surface energy materials
- Withstands rapid thermal cycling
- Resistant to organic solvents, alcohols and acids
Applications & Uses
- Markets
- Applications
- Application Area
- For Best Results
- The surfaces you wish to bond should be clean and free of oil, moisture and dust. If the surface temperature is below 40°F, it may be difficult to achieve a proper bond.
- Do not use a pressure-sensitive adhesive product where it will be exposed to temperatures lower or higher than those designated for each product. Heat can destroy the effectiveness of the bond and extreme cold can cause the adhesive to harden and not adhere properly.
- When the tape is applied, use firm hand or lamination pressure to achieve contact between the adhesive and the surface to which it is applied. Hand rollers or nip rollers may be needed for certain products or applications.
Consult your AR sales representative if you need additional information.
- Applications
The typical use for this product is bonding, laminating, and assembly of in-vitro diagnostic and related membrane based immunoassay products. This product is also suitable in applications for flexible circuits, gaskets and heaters where a thin bond line is required.
Properties
- Typical Properties
Value Units Test Method / Conditions Peel Adhesion on Stainless Steel 12.4 N/25mm 180 degrees, 12 ipm, 5 min. dwell Peel Adhesion on Stainless Steel 12.4 N/25mm - Recommended Storage of Unconverted Product (50% ± 20% RH ) 21 ± 11 °C - Release of Polyester Liner (1) 27.0 g/2” 180 degrees, 300 ipm Release of Polyester Liner (1) 27 g/2” - Release of Polyester Liner (2) 14.0 g/2” 180 degrees, 300 ipm Release of Polyester Liner (2) 14 g/2” -
Technical Details & Test Data
- Product Construction
Typical Values Description Liner thickness 2.0 mil 51 μm S/F, Clear PET release liner Adhesive thickness 1.0 mil 26 μm SR-22, silicone adhesive Liner thickness 2.0 mil 51 μm S/F, Clear PET release liner Total thickness 1.0 mil 25 μm (Excluding liners) - Note
- All stated values are nominal and should only be used as a guide for selection. They are not specifications. The information contained on this data sheet is based upon test results of limited quantities of this material and may be modified by Adhesives Research following additional production experience and evaluation. This data should not be used in preparing specifications. Products identified as developmental may be subject to modification by Adhesives Research, Inc.
Safety & Health
- Safety Data
- SR-22 has passed cytotoxicity tests conducted by an independent laboratory. Additional safety information is available upon request.
Storage & Handling
- Shelf Life
- 1 Year
- Shelf life of Unconverted product
- Not to exceed one year from date of manufacture
- Storage of Pressure-Sensitive Adhesive Tapes
- Pressure-sensitive adhesive tapes function as a mechanical product however, the adhesive itself is a chemical composition that can be sensitive to environmental conditions. A purchaser of pressure-sensitive adhesive products should be aware of the shelf life of each product and not purchase more than it can use before the expiration date. Shipping and storage conditions affect shelf life. The optimum storage temperature is 70 °F (21 °C). Cool, dry storage is recommended.
- Recommended Storage of Unconverted Product
- 21 ± 11 °C (50% ± 20% RH)