Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- Dilution ratio: 1:10 (1 part cleaner to 10 parts water)
- Coverage: 1,000 - 1,500 square feet per gallon
- Solids: 25%
- Biodegradable
- Less than 1% VOC
- No ammonia, phosphates, alkali, acids, or formaldehyde
- No zinc
- Zero tribogeneration
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Directions
Sweep floor with untreated, dry mop. Dilute Restorer Cleaner 10:1 (10 parts water to 1 part concentrate). Using a clean rayon mop, apply a thin coat of mixed solution to the floor by fully saturating mop and then wringing out excess cleaner, so that the floor is not over saturated with moisture. Remove soiled solution. Allow floor to dry one hour before resuming traffic.
For auto scrubbers, gently scrub diluted solution with clean polishing pad (white). Use 1,500 - 2,000 RPM with light pressure setting to prevent removal of finish. Check resistivity and apply a second treatment if necessary. Consult floor finish application procedure for details and precise instructions.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Surface Resistance (100 volts) 10^7 - 10^9 Ohms -