Staticide® 30 Concentrate

• Dust attraction
• Damage potential to sensitive electronic components and subassemblies during manufacture, testing, packaging, shipping, and receiving
• Ignition of combustible vapors, dust, and solvents, causing fire or explosion
• Irregularities caused by static in quality printing, heat sealing, silk screening, lamination, and other special applications
• Static discharge on workbenches and production surfaces.

Staticide® 30 Concentrate saves freight, handling, and storage costs for high production facilities while offering greater flexibility in dilution.

• Exceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria
• Meets requirements for topical anti-stats as listed in Military Handbook DOD-HDBK-263
• Proven effective in relative humidity below 15%
• Decays static in less than 2 seconds
• No chlorides or nitrates
• Non-flammable

Once diluted, this product can be applied in a variety of ways: wipe non-porous surfaces, spray textiles, roll-coat plastic film, or spray with a fine mist in high production applications.

Fill clean container with desired amount of solvent. Water or isopropyl alcohol can be used. Use purest solvent available. Add appropriate volume of Staticide® 30 Concentrate to the water to avoid foaming. 30cc is approximately 1 ounce by volume.

For porous surfaces: 100cc concentrate to 1 gallon solvent (39 parts solvent to 1 part concentrate)

For non-porous surfaces : 40cc concentrate to 1 gallon of solvent (99 parts solvent to 1 part concentrate).

For shielding bag manufacturing : 40cc concentrate to 1 gallon of isopropyl alcohol (99 parts IPA to 1 part concentrate)

• Product #3030Q: 1-quart bottle
• Product #3030G: 1-gallon bottle
• Product #3030D: 50-gallon drum