Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Product Applications
- Accepta® BS100 is a cooling water dispersant & pre-commission cleaning aid
- BS100 can also be used as a penetration aid and degreaser to help remove oil and organic fouling during the pre-commission cleaning of open and closed heating and cooling systems.
- It should be used in conjunction with one of Feedwater’s cleaning agents such as CORROSPERSE, POLYSHIELD or PRECLEAN.
- Dosage Rates Information
- BS100 should be fed continuously into the system at a point where it will be mixed and uniformly distributed. The product may be diluted with water if required.
- For HSG 274 disinfection of cooling towers BS100 should be dosed at the rate of 100ml/m³ of system volume.
- For continuous dosage to enhance the performance of biocide programs in either a recirculating or once through system a dosage of 5-10ml/m³ of make-up should be maintained.
- For pre-commission cleaning operations a dosage of 50 - 200ml/m³ of system volume is normally required.
Properties
- Physical Form
- Appearance
- Cloudy colourless liquid
- Odor
- Slight
- Typical Properties
Value Units Test Method / Conditions Density approx. 1.0 - - pH (2% Solution) 5.0 - 7.0 - -