Products in Basic Thermoplastics: 3D Printing

SABIC's Specialties Business LNP™ THERMOCOMP™ AM Compound AF004XXAR1 is a top-quality material based on acrylonitrile butadiene styrene (ABS) resin containing 20% glass fiber specifically designed for large format additive manufacturing (LFAM) applications. This grade is easy to process, has low warp, and provides excellent print surface quality, making it an ideal candidate for a broad range of applications and tooling, including thermoforming and vacuum forming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP THERMOCOMP AC004XXAR1 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Easy Processing, Low warp and Good Print Surface quality, making them a good candidate material for a broad range of applications and tooling, including thermoforming and vacuum-forming.FeaturesCost EffectiveEasier ProcessingGood PrintabilityGood ProcessabilityHigh StiffnessLow WarpageVacuum FormingApplications3D PrintingAdditive Manufacturing This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

MOCOM Compounds CELLIDOR® CP 400-10 is a base polymer made of CelluloseAcetatePropionate with a 10% phthalate-free plasticiser. It is typically used in various applications. For pre-drying conditions, it should be placed in an air circulating dryer at 60-90°C for 2-4 hours, depending on the moisture content, with a maximum moisture content of 0.15%. For processing injection molding, the melt temperature should be set between 180-230°C and the mold temperature should be between 40-80°C.

MOCOM Compounds CELLIDOR® CP 410-10 is a base polymer made of cellulose acetate propionate with a 10% phthalate-free plasticiser added as a filler/additive system. Pre-drying conditions involve an air circulating dryer at 60-90°C for 2-4 h, depending on the moisture content which should not exceed 0.15%. When processed via injection molding, the melt temperature should be between 180-230°C and the mold temperature should be between 40-80°C. Typical applications for this material include thick-walled parts with good strength and durability.

Gianeco PLA FILAMENT polylactic acid is used in extrusion, injection, fiber, 3D printing, filament and thermoforming.

EnvisionTEC ABS 3SP White is an extremely flexible ABS-like 3D printing material for 3SP technology. ABS Hi-Impact 3SP is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.

Gianeco PLA PELLETS 2500HP-031 is used in extrusion, 3D filament and injection.

EnvisionTEC ABS Tough Series (ABS Tough 3SP, ABS Tough, ABS Tough M) is an extremely tough ABS-like 3D printing material.

EnvisionTEC ABS Tough is an extremely tough ABS-like 3D printing material.

EnvisionTEC ABS Tuff Series (ABS Tuff, ABS Tuff M, E-Model HS, E1-Model HS) is a 3D printing material, mainly used for Biomimetics studies, research and design.

Mowiflex™ C 17 is Kuraray’s polyvinyl alcohol-based polymer compound for thermoplastic processing. MOWIFLEX™ is a nontoxic, biodegradable, water-soluble resin that forms clear, glossy films. It has high tensile strength and can be processed using conventional thermoplastic technologies (injection molding, 3D printing, etc.). It was designed to fit the requirements for Rapid Prototyping and is a versatile component. Moreover, MOWIFLEX™ can be colored, allowing processing as a highly concentrated masterbatch.