Products in Oil, Gas & Mining Chemicals: Oil Based Mud

LoneLube 100L is the most fully environmentally friendly Modified Natural Base lubricant in the market today. It is designed to reduce torque and drag on the drill string against the well bore and to reduce metal to metal friction in POP type uses. LoneLube 100L is used in most oil-based systems.

BT BHI is bis-hydroxyl imidazoline (based on ricinoleic acid) and applied in Corrosion inhibitor-MWF’S, Emulsifier for oil-based drilling muds and Excellent corrosion inhibition for high oil containing products.

RD-220™ is a freely flowing multi-component blend prepared for combating lost circulation in drilling fluids. RD- 220™ is effective in a range of fracture plugging and is used as a maintenance treatment and higher addition rates when significant mud loss occurs. RD-220™ can be used for all invert fluids, including synthetics and in fresh and saltwater mud.

LA-200™ is an amine treated lignite and filtrate control additive for non-aqueous fluids especially invert emulsions. It is compatible with diesel, esters, olefins and mineral oils typically used as drilling fluid base oils.

XP-911® is a seepage loss control agent for water and oil-based drilling fluids designed for low cost and maximum performance. The product is composed of an inert and crush-resistant modified carbon matrix that will not react and corrode metal surfaces and is not abrasive.

TRL-100™ is a unique material designed to be used as loss circulation material and as seepage agent. Its particle size distribution is an important characteristic of this product.

Pecomul 500-D™ is a specially formulated amido imidazoline product that is blended with a friendly solvent. Pecomul 500-D™ is a concentrated blend that promotes rapid oil wetting of drill solids and barite in and between synthetic oils, ethers, esters, poly-olefins and internal olefins as well as in calcium or sodium brines.

GILSON 365™ is a natural gilsonite with ash content less than 1.1%. It is used for filtrate loss control and gives excellent shale control and stability while drilling. Because GILSON 365™ has a large molecular weight distribution and a high molecular weight, the softening point is high compared to other types of polymers, which allows it to soften or deform as it nears its softening point instead of completely melting into a low-viscosity liquid. Even when GILSON 365TM is 20 degrees above its softening point, it is still a high-viscosity liquid.

PEG-503™ is a proprietary, multi-blend product designed to plug loss circulation zones with fine to medium fractures. PEG-503™ is easily mixed with conventional rig equipment. PEG-503™ is designed to be used in water or oil based drilling fluids. PEG-503™ produces a very thick, tough cake which resists washing away once drilling resumes. Normal quantities required are 7ppb, when severe losses are found add 15 - 20 ppb.

Boremaster® is a low-cost drilling fluid conditioning agent that dramatically reduces torque and drag-HT/HP filtration-whole mud loss and works efficiently and safely in oil, synthetic, or water base mud. It has no sheen and no toxic.

Pecomul 100™ is an invert mud emulsifier system comprised of oxidized and modified tall oil for diesel based drilling fluids.

PecoFlake 303™ is a unique proprietary flaked calcium carbonate effective in controlling seepage and circulation losses in completion and drilling fluids. It is available in fine, medium and coarse grades.

OC-390™ is recommended as rheological additive in oil based fluids and drilling muds. It is suitable for use in low aromatic oils and synthetic solvents. In addition to imparting excellent rheological properties, OC-390™ increases the carrying capacity and hole cleaning capabilities of the mud. Additionally, temperature and emulsion stability will be increased and fluid loss decreased.

Pecomul 350™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for synthetic based drilling fluids systems. Pecomul 350™ is designed using low aromatic base oils.

PecoBead 150™ lubricant additive is a proprietary blend of highly active copolymer beads in an environmentally friendly carrier fluid. It is used as a drilling fluid lubricant where ease of addition is needed and prevents the possibility of spillage of dry beads at the rig floor as a possible safety benefit.

PecoSeal 306™ is a unique formula of carbon base material that has a selective particle distribution in order to reach the most optimal distribution. This material is used as bridging agent or plugging in porous formations. PecoSeal 306™ is thermally stable and non-expansible; it has a neutral pH and will not affect adversely the properties of the mud.

Pecomul 300™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for diesel based drilling fluids systems.