Products in Monomers & Oligomers: Lubricants

MASCEROL™ Glycerine 99.7 USP, non-GMO is highly refined with a minimum glycerol content of 99,7%. MASCEROL™ Refined Glycerine is used as a base ingredient in personal care preparations. It provides moisturizing properties and improves skin permeability. It is a gentle ingredient for anti-aging and anti-irritant cosmetics, found in skin & hair care applications, shaving cream, soaps & water-based lubricants. MASCEROL™ Refined Glycerine is used as an excipient in pharmaceutical production and preparations for improving smoothness, providing lubrication, and because of its humectant characteristics. It is found in allergen immunotherapies, cough syrups, tinctures, elixirs & expectorants. It is a tablet-holding agent and a key ingredient in soft gelatin capsules. In food as well as beverage applications MASCEROL™ serves as a humectant or wetting agent, solvent, sweetener or sugar substitute (approx. 60 % as sweet as sucrose), thickening agent, or filler.

MASCEROL™ Glycerine 99.7 USP, non-GMO, RSPO MB is highly refined with a minimum glycerol content of 99.7%. MASCEROL™ Refined Glycerine is used as a base ingredient in personal care preparations. It provides moisturizing properties and improves skin permeability. It is a gentle ingredient for anti-aging and anti-irritant cosmetics found in skin and hair care applications, shaving cream, soaps, and water-based lubricants. MASCEROL™ Refined Glycerine is used as an excipient in pharmaceutical production and preparations for improving smoothness, providing lubrication, and because of its humectant characteristics. It is also found in allergen immunotherapies, cough syrups, tinctures, elixirs, and expectorants. It is a tablet-holding agent and a key ingredient in soft gelatin capsules. In food as well as beverage applications, MASCEROL™ serves as a humectant or wetting agent, solvent, sweetener, or sugar substitute (approximately 60% as sweet as sucrose), thickening agent, or filler.

Alnor Oil Company Castor Oil, a clear, viscous liquid derived from the seed of the castor plant, genus ricinus communis. At 25°C, its appearance is clear, and it maintains a faint odor. Exceptionally clear and of high quality, this castor oil serves a variety of applications.

Low Moisture (Urethane Grade) Castor Oil is produced by removing the moisture from Castor oil. If a lower acid value is required, Neutralized Castor is used.

Alnor Oil Company Neutralized Castor Oil, a clear and viscous liquid derived from the seed of the castor plant, genus ricinus communis. At 25°C, it exhibits a brilliantly clear appearance and maintains a faint odor. Renowned for its clarity and quality, this castor oil is well-suited for various applications.

Alnor Oil Company Pale Pressed Castor Oil, a clear and viscous liquid derived from the seed of the castor plant, genus ricinus communis. At 25°C, it exhibits a clear appearance and maintains a faint odor. Renowned for its clarity and quality, this castor oil is well-suited for various applications.

ILCO MIN 8015 CD Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8015 CD are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

Mosselman PEG 6000 Powder Polyethylene glycols are water-soluble polymers of the polyether alcohol types. They are used as plasticizer, humectant, lubricant, dispersing agent, solubilizer and mold-release agent.

ILCO MIN 8080 OD Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8080 OD are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

ILCO MIN 8020 SDF Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8020 SDF are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

ILCO MIN 8020 SD Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8020 SD are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

ILCO MIN 8010 TD Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8010 TD are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

Mosselman Stearic Acid 1865 (67701-03-5) is the most common saturated fatty acid occuring in natural fats. The commercial stearic acid contains palmitic and stearic acid. Stearic acid is used in the manufacture of stearates, lubricants, soaps, cosmetics etc. Further applications are in rubber compounds, coatings, food packaging and candles.

ILCO MIN 8085 OD Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8085 OD are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

ILCO MIN 8010 T Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8010 T are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

ILCO MIN 8015 C Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8015 C are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

Mosselman Stearic Acid 1855 Flakes (67701-03-5) is the most common saturated fatty acid occurring in natural fats. The commercial stearic acid contains palmitic and stearic acid.

Mosselman Tall Oil Fatty Acids 130 (61790-12-3) is a by-product in the production of wood pulp by the Kraft process. The “black liquor” which is obtained in the processing of the wood pulp contains the sodium soap of the tall oil fatty acids and resin acids. By acidification a mixture of fatty acids and resin acids is obtained. By further distillation the fatty acids and the resin acids are separated.

Mosselman PEG 6000 Flakes (25322-68-3) Polyethylene glycols are water-soluble polymers of the polyether alcohol types. They are used as plasticizer, humectant, lubricant, dispersing agent, solubilizer and mold-release agent.

Mosselman Stearic Acid 1840 (67701-03-5) is the most common saturated fatty acid occuring in natural fats. The commercial stearic acid contains palmitic and stearic acid. Stearic acid is used in the manufacture of stearates, lubricants, soaps, cosmetics etc. Further applications are in rubber compounds, coatings, food packaging and candles.

ILCO MIN 8040 T Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8040 T are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

ILCO MIN 8040 TD Fatty amines are used as corrosion protection additives as such and as intermediates for the production of corrosion protection agents or polyurea greases. Depending on the chain length ILCO MIN 8040 TD are at ambient temperature liquid, solid or pasty and have a typical amine type smell.

Hefei TNJ Chemical Industry 2-Ethylhexyl methacrylate can improve the plasticity of plexiglass when it is used in plexiglass comonomer. It is also used in coating resin, adhesive, lubricant, textile additives, papermaking, fiber industry and other industries.

Swisloyd Dehydrated Castor Oil SL-DCO is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.

Swisloyd First Special Grade SL-CO-FSG is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, ricinus communis, is not a member of the bean family.

Guangzhou Chemical MMA(Methyl Methacrylate) is the essential building block for acrylic-based products. It polymerises easily to form resins and polymers with excellent performance characteristics. These include excellent durability, strength, transparency and UV and abrasion resistance.

Girnar Industries Castor Oil First Special Grade is castor oil bleached to British Standard Specifications. It is a yellow viscous liquid free from suspended matter and insoluble in water.

Prasol Chemicals ETHYLENEDIAMINE is used to manufacture chelating agents like EDTA.

SYLFAT FA1 Tall Oil Fatty Acid (TOFA) combines a long carbon chain (C18) of relatively high unsaturation with the acid functionality of a carboxyl group (-COOH).

Swisloyd Pale Pressed Grade SL-co-pp is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.

SYLFAT FA2 Tall Oil Fatty Acid (TOFA) combines a long carbon chain (C18) of relatively high unsaturation with the acid functionality of a carboxyl group (-COOH).

Polymer Chemistry Innovations ETOX is An Organic Intermediate and Monomer Etox (2-ethyI-2-oxazoIine) is an organic intermediate and monomer that is used in water-soluble polymers, pharmaceuticals, cosmetics, specialty coatings and adhesives,bactericides and herbicides..

Swisloyd Commercial Grade SL-CO-COM is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.