Products in Monomers & Intermediates: Waterborne Adhesive

Polidene® 33 - 086 is a self-crosslinking acrylic ester/vinylidene chloride copolymer, designed specifically as a low-flammability binder for textile applications. It is APEO-free. POLIDENE 33-086 is a self-crosslinking acrylic ester/vinylidene chloride copolymer, designed specifically as a low-flammability binder for textile applications. It is APEO-free.

AFEX™ CN23C is a base drying oil called as Canola having no double bond.

AFEX™ LN30C is a base drying Oil called as Linseed having two conjugated double bonds.

AFEX™ SB23C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

CURING AGENT PZ-28 is polyfunctional aziridine (PI based), employed as crosslinking agent and adhesion promoter. It is a clear, amber liquid, miscible in water and many common organic solvents.

AFEX™ CR30C is a base drying oil called as Corn having no double bond.

ELAPOL 4010 A is a linear, saturated polyester polyol by Elachem. It contains aliphatic acid & diethylene glycol (DEG).

AFEX™ LN23C is a base drying Oil called as Linseed having two conjugated double bonds.

AFEX™ TG20C is a base drying Oil called as Tung having three conjugated double bonds.

AFEX™ TG30C is a base drying Oil called as Tung having three conjugated double bonds.

PolyAziridine Global PZP-1000 is a propylene imine tri-functional polyaziridine that is used as a cross linker for both aqueous and non-aqueous coatings, inks, and adhesives to promote both physical and chemical properties. The aziridine end groups can react with active hydrogen as found on carboxyl groups of acrylic emulsions or polyurethane dispersions. PZP-1000 is added at levels of 1% to 3% to finished formulated coatings, inks, or adhesives. It is added slowly and under good agitation. After mixing, an aqueous system with a pH of 9.0-9.5 will typically have a pot life of 18-36 hours. This time will be reduced when the pH is lower.

AFEX™ CR23C is a base drying oil called as Corn having no double bond.

AFEX™ LN20C is a base drying Oil called as Linseed having two conjugated double bonds.

AFEX™ SB30C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

AFEX™ TG23C is a base drying Oil called as Tung having three conjugated double bonds.

Akuacure 8004N is a Anti-yellowing Water dispersible Polyisocyanate used as Adhesive, Paint and coating.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Akuacure 8100N is a Anti-yellowing Water dispersible Polyisocyanate used as Adhesive, Paint and coating.

AFEX™ CR20C is a base drying oil called as Corn having no double bond.

Akuacure 4000N is a Anti-yellowing Water dispersible Polyisocyanate used in Adhesive, Paint and coating.

Capatue™ Epoxy Silanes SCA-E87F is a versatile epoxy organo-reactive silane with two hydrolysable ethoxy groups suitable for use as adhesion promoters in polysulfide, urethane, epoxy and acrylic caulks sealants and adhesives, especially suitable to be used as adhesion promoter and crosslinker for waterborne adhesives and sealants.

Akuacure 8103N is a Anti-yellowing Water dispersible Polyisocyanate used as Adhesive, Paint and coating.

Bisomer® S10W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

Bisomer® MPEG550MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

CoatOSil™ MP 200 silane promotes adhesion in a broad range of applications via multiple epoxy and silane groups on each oligomer chain. Its gamma-gylcidoxy propyl epoxide ring reacts with many organic groups while its alkoxy silane groups promote adhesion to inorganic substrates. Condensation of its silanol groups can also provide crosslinks between polymer chains.

Bisomer® MPEG350MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

AFEX™ CN20C is a base drying oil called as Canola having no double bond.

Akuacure W3000 is a Per fluorine modified Water Dispersible Blocked isocyanateused and used as 1K Baking system Adhesive, Paint and coating.

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

PolyAziridine Global PZE-1000 is an ethylene imine based tri-functional polyaziridine that is used as a cross-linker for both aqueous and non-aqueous coatings, inks, and adhesives to promote both physical and chemical properties. With the highest level of functionality at 3.3, it yields the highest level of cross-link density of polyfunctional aziridines. The aziridine end groups can react with active hydrogen as found on carboxyl groups of acrylic emulsions or polyurethane dispersions. PZE-1000 also has a hydroxyl group, which allows it to dispersion readily into aqueous systems. PZE-1000 is added at levels of 1% to 3% to finished formulated coatings, inks, or adhesives. It is added slowly and under good agitation. After mixing, an aqueous system with a pH of 9.0-9.5 will typically have a pot life of 18-36 hours. This time will be reduced when the pH is lower.

Bisomer® S20W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

Denacol EX-313 is used in cross-linking agent for aqueous coating material, cross-linking agent for aqueous adhesive and surface treatment agent for fiber.

Akuacure 4002B is a Water-dispersible Blocked Isocyanate used as 1K Baking system Adhesive, Paint and coating.

AFEX™ CN30C is a base drying oil called as Canola having no double bond.

CURING AGENT X7 is polyfunctional aziridine, employed as crosslinking agent and adhesion promoter. It is a clear, amber liquid, miscible in water and many common organic solvents. Aziridine content is 6,35-7 meq/g