Products in Other Printing & Packaging Applications: Fluoropolymers

Chemguard S-550 High Performance Nonionic Fluorosurfactant is an ethoxylated nonionic fluorosurfactant. It provides surface tensions as low as 17 dyn/cm in water at low concentrations, and is surface active in many other solvents. Chemguard S-550 imparts enhanced wetting, spreading, leveling, and flow control properties to various types of waterbased and solvent-based formulations. It is ideal for coating formulations designed to coat difficult substrates because of its extremely low equilibrium surface tension and excellent dynamic surface tension properties.

KTL 1N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

KTL 500F can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

KTL 9S can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

HaloPolymer PTFE Fluoroplast-4 grade PN40 (F-4PN40) is fully fluorinated resin which has an excellent chemical stability, electrical and mechanical properties. The material is a granular powder product designed for usage from small to medium billet compression molding, which is well suited to thin skived film applications requiring excellent physical and electrical properties.

Maskom masterbatch & Compound Technologies M 85091 is a PROCESS AID (PPA). Guarantees uniform melting, low friction and smooth product surface for the extruder. Removes burns in dead zones of the extruder, avoids stripe and herringbone formation on the film..

FluorN 1740G is a fluorosurfactant additive that provides low surface tension in solvent-based products, enabling better wetting, spreading, leveling and other beneficial properties in coatings, paints, inks, cleaning products, conditioners, polishers, etc. At very low concentrations, FluorN 1740G can deliver great wetting power.

KTL 20N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

KTL 9N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

Chemguard S-554-100 High Performance Nonionic Fluorosurfactant is a 100% active ethoxylated nonionic fluorosurfactant. It provides surface tensions as low as 17 dyn/cm in water at low concentrations, and is surface active in many solvents. Chemguard S-554-100 imparts enhanced wetting, spreading, leveling, and flow control properties to various types of waterbased and solvent-based coating formulations. It is ideal for coating formulations designed to coat difficult substrates because of its extremely low equilibrium surface tension and excellent dynamic surface tension properties.

KTL 10N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

Chemguard S-764P-12A is a short chain, phosphate ester type fluorosurfactant. It is water based and free from volatile organic compounds (VOC). It provides surface tensions as low as 18 dyn/cm in water at very low concentrations. ChemguardS-764P-12A imparts enhanced wetting, spreading, leveling, anti-blocking, and flow control properties to various types of water-based coatings. It is therefore excellent for architectural paints and stains, concrete coatings, industrial coatings, and aqueous hydrocarbon surfactant solutions. ChemguardS-764P-12A has excellent dynamic surface tension properties which allow the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low gloss paints, sealers, and stains.

Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is a short-chain, phosphate ester type fluorosurfactant. It is water-based and free from volatile organic compounds (VOC). It provides surface tensions as low as 18 dyn/cm in water at very low concentrations. Chemguard S-764P-14A imparts excellent wetting, spreading, leveling, anti-blocking, and flow control properties on various types of water-based coatings for architectural paints and stains, concrete coatings, industrial coatings, and hydrocarbon surfactant solutions. Chemguard S-764P-14A has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

KTL 2N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

KTL 8FH can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

Chemguard S-550-100 High Performance Nonionic Fluorosurfactant is a 100% active ethoxylated nonionic fluorosurfactant. It provides surface tensions as low as 18 dyn/cm in water at low concentrations, and is surface active in many other solvents. Chemguard S-550-100 imparts enhanced wetting, spreading, leveling, and flow control properties to various types of waterbased and solvent-based coating formulations. It is ideal for coating formulations designed to coat difficult substrates because of its extremely low equilibrium surface tension and excellent dynamic surface tension properties.

KTL 8F can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

Dynax DX4000 is a highly effective and efficient product, especially designed to provide rapid spreading, wetting and leveling performance to various water-based coating systems, such as paints, inks, floor polishes, etc., on low surface tension substrates that are difficult to wet out. DX4000 provides both superior dynamic and equilibrium surface tensions compared to conventional surfactants including fluorochemical and silicone surfactants: it quickly lowers the surface tension of aqueous solutions down to 16 dynes/cm at a very low concentration. DX4000 can be used without a defoaming agent because of its low foaming tendency

Chemguard S-761P High Performance Anionic Fluorosurfactant is a phosphate ester type fluorosurfactant. It provides surface tensions as low as 17 dyn/cm in water at very low concentrations. Chemguard S-761P imparts enhanced wetting, spreading, leveling, and flow control properties on various types of waterbased coatings for architectural paints and stains, concrete coatings, industrial coatings, and aqueous hydrocarbon surfactant solutions. Chemguard S-761P has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and provides improved dirt pick-up resistance to exterior paints and interior low gloss paints, sealers, and stains.

Maskom masterbatch & Compound Technologies M 85092 is a PROCESS AID (PPA). Guarantees uniform melting, low friction and smooth product surface for the extruder. Removes burns in dead zones of the extruder, avoids stripe and herringbone formation on the film..

Chemguard S-760P High Performance Anionic Fluorosurfactant is a phosphate ester type fluorosurfactant. It provides surface tensions as low as 17 dyn/cm in water at very low temperatures. Chemguard S-760P imparts enhanced wetting, spreading, leveling, and flow control properties to various types of waterbased coatings. It is therefore excellent for architectural paints and stains, concrete coatings, industrial coatings, and aqueous hydrocarbon surfactant solutions. Chemguard S-760P has excellent dynamic surface tension properties which allow the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low gloss paints, sealers, and stains

KTL 4N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

Dynax DX4010N. is a highly effective and efficient fluorosurfactant, especially designed to provide rapid spreading, wetting and leveling performance to various water-based coating systems, such as paints, inks, floor polishes, etc., on low surface tension substrates that are difficult to wet out. DX4010N provides both superior dynamic and equilibrium surface tensions compared to conventional surfactants including fluorochemical and silicone surfactants: it quickly lowers the surface tension of aqueous solutions down to 16 dynes/cm at a very low concentration. DX4010N can be used without a de-foaming agent because of its low foaming tendency.

FluorN 2900 is a 100% active, non-ionic, alkylphenolethoxylate-free (APEO), PFOA/PFOS-free, perfluoropolyether (PFPE) fluoro-surfactant that at low concentration reduces the surface tension of aqueous and polar solvent formulations sufficiently to permanently wet and provide smooth, pinhole-free films on PTFE and other low energy surfaces. FluorN 2900 provides for excellent substrate wetting, leveling, stripping, re-coating, anti-fogging, anti-blocking, cleanability, and open time extension. In aqueous and polar solutions, it is low or non-foaming.

Chemguard S-554 High Performance Nonionic Fluorosurfactant is an ethoxylated nonionic fluorosurfactant. It provides surface tensions as low as 17 dyn/cm in water at low concentrations, and is surface active in many other solvents. Chemguard S-554 imparts enhanced wetting, spreading, leveling, and flow control properties to various types of water-based and solvent-based systems. It is ideal for coating formulations designed to coat difficult substrates because of its extremely low equilibrium surface tension and excellent dynamic surface tension properties.

Chemguard S-764P is a short chain, phosphate ester type fluorosurfactant. It is water based and free from volatile organic compounds (VOC). It provides surface tensions as low as 17 dyn/cm in water at very low concentrations. ChemguardS-764P imparts enhanced wetting, spreading, leveling, and flow control properties on various types of water based coatings for architectural paints and stains, concrete coatings, industrial coatings, and aqueous hydrocarbon surfactant solutions. ChemguardS-764P has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and provides dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

KTL 10S can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

KTL 8N can be used widely, with a range of coating thickness(1 - 100 µm), and coatings(glossy or mat), printing inks. Since particle size distributions of our products are narrow, they excel in dispersibility, and can also be used for the clear top coat.

Dynax DX4005N is a highly effective and efficient fluorosurfactant, especially designed to provide rapid spreading, wetting and leveling performance to various water-based coating systems, such as paints, inks, floor polishes, etc., on low surface tension substrates that are difficult to wet out. DX4005N provides both superior dynamic and equilibrium surface tensions compared to conventional surfactants including fluorochemical and silicone surfactants: it quickly lowers the surface tension of aqueous solutions down to 16 dynes/cm at a very low concentration. DX4005N can be used without a de-foaming agent because of its low foaming tendency.

HaloPolymer PTFE Fluoroplast-4 grade PN90 (F-4PN90) is fully fluorinated resin which has an excellent chemical stability, electrical and mechanical properties. The material is a granular powder product designed for usage from small to medium billet compression molding, which is well suited to thin skived film applications requiring excellent physical and electrical properties.