Products in Personal Hygiene: Narrow Molecular Weight Distribution

Tasnee PP H2350 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 35.0 g/10min. Tasnee PP H2350 is a very narrow molecular weight distribution homopolymers, suitable for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for continuous filament (CF) yarns.

NOVIS P-490 is an Isotactic low molecular weight polypropylene with enhanced flow properties. Melting point and most of its mechanical properties are similar to conventional PP. It is its low molecular weight and narrow molecular weight distribution which impart NOVIS P-490 high melt flow rate.

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

Metocene MF650Y is a high melt flow rate polypropylene homopolymer resin with very narrow molecular weight distribution. It is suitable for melt blown fibers as well as compounding extrusion applications.This material is available as a free-flowing, low dust granule resin. The very narrow molecular weight distribution and high degree of resin consistency promote finer fibers, enhanced fiber filament thread line continuity as well as reduced fly and lint in melt blown spinning processes. Its high melt flow rate allows reduced processing temperatures and energy savings. This is a low smoke, clean running resinwith good thermal and processing stability.

RG 1101 RC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, BCF/CF, POY Yarns, Injection Molding of Articles

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Moplen HP562T is a Polypropylene homopolymer resin for spunbond fiber

Metocene MF650X is a high melt flow rate polypropylene homopolymer resin with very narrow molecular weight distribution. It is suitable for melt blown fibers as well as compounding extrusion applications. This material is available as a free-flowing, low dust granule resin. The very narrow molecular weight distribution and high degree of resin consistency promote finer fibers, enhanced fiber filament thread line continuity as well as reduced fly and lint in melt blown spinning processes. Its high melt flow rate allows reduced processing temperatures and energy savings. This is a low smoke, clean running resin with good thermal and processing stability.

Moplen HP563T is a Fast crystallization polypropylene for spunbond

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Moplen HP561R is a Polypropylene homopolymer resin for spunbond fibers

TATREN HT 25 11 is a controlled rheology homopolymer of very narrow molecular weight distribution. Consistent processability, good color and thermal stability, very low volatiles and low smoke make this grade suitable to be used for very demanding fiber applications. This grade contains anti gas fading additive package.

RG 1101 SC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, Disposable Napkins, Diaper, GeoTextiles, Filter Application

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Random copolymer polypropylene; lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber. Recommended for: Non woven soft touch fabrics Spunbond process; melt spinning of low denier fibers where it is necessary this properties; extrusion coating of raffia woven fabrics; injection molding general purpose applications.

RG 1101 R is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

F135 is a Controlled Rheology Polypropylene Homopolymer produced by Spheripol II Technology F135 combines exceptional processability with high melt flow, narrow molecular weight distribution & gas fading resistance F135 is recommended for spunbond - nonwoven & other extrusion process and is suitable for hygiene products

RG 1101 XR is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles