Products in Building & Construction: Coated Surfaces

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-CR is a thick, high gloss epoxy Clear Casting Resin. One coat of NU-LUSTRE-CR equals up to 70 coats of varnish. NU-LUSTRE-CR is HEAT-Stable, remaining clear when other epoxies will haze or deform when hot objects are placed upon the surface. It can be applied over newspaper or magazine clippings, photographs, leather, wood, ceramic, rocks, dried flowers, shells and many other items. NU-LUSTRE-CR is the ideal coating for molds, tables, decorated serving trays, coasters and bar tops, and more.

Superior masstone is really black, does not tend toward gray, Greater jetness than any other tint material available and has better coverage in nearly all applications.

Superior masstone is really black, does not tend toward gray, Greater jetness than any other tint material available and has better coverage in nearly all applications.

Westcoat SC-42 WB Acrylic Sealer is a one part, water-based, clear acrylic concrete sealer. It is high quality, easy to use and cost-effective. It is typically will not darken the substrate, like a solvent-based acrylic and will provide a more subdued finish.

Permalac Original is our best-selling, air-dry acrylic lacquer for interior and exterior use.

Wilko Paint Wilkopon Primer Red Oxide Wilko No. 347.49 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

Permalac NT Rose Gold Matte is an air-dry, transparent, rose gold-colored acrylic lacquer for interior and exterior use.

Huangshan Deping Chemical Curing Agent MB68 has high scrub resistance, mildew and alkali resistance, good hiding power, high whiteness, and long-lasting brightness.

RoofDX Copper­­™ is an extremely tough, metallic, rubberlike, waterproofing coating with a very attractive copper finish that will actually patina due to its composition of copper flakes. This amazing "liquid copper" coating can be applied to any common roofing substrate and will give the appearance of copper sheet roofing at a fraction of the cost. ROOFDX COPPER, like copper sheet, will develop a classic green patina, or it can be sealed with CLEARCOAT 44 to keep its new appearance.

Permalac NT Copper Matte is an air-dry, opaque, copper-colored acrylic lacquer for interior and exterior use.

PRECIDIUM™ LS1150D RFS is a VOC-free two-component coating used on its own or as part of our PRECIDIUM™ LS1150D RFS, developed to provide an attractive, durable, chemically-resistant floor coating. Ideal substrates are properly prepared concrete, wood, steel, or other compatible polyurea coatings.

GacoDeck® TopCoat DT49-1 protects deck surfaces, including balconies, patios, roof decks, ramps and elevated walkways. Apply TopCoat over plywood, concrete, metal, fiberglass and previously coated deck systems. GacoDeck® TopCoat is a water-borne, single component elastomeric coating that incorporates ADA-compliant granules for added slip and wears resistance. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.

Permalac NT Christmas Gold Matte is an air-dry, transparent, gold-colored acrylic lacquer for interior and exterior use.

POLYQuik® P-700 is a two-component, aromatic, sprayable pure polyurea elastomeric coating. It is used as a highly elastic, waterproof protective coating for both vertical and horizontal surfaces. It is specially formulated for excellent overcoat adhesion to geotextiles and old coatings with minimal surface preparation. Use POLYQuik® P-700 where regular dynamic movement is expected. POLYQuik® P-700 can receive a broadcast of aggregate for slip resistance on horizontal surfaces.

Permalac NT Electrostatic is a clear solvent-borne acrylic lacquer for metals. It has been formulated for electrostatic application.

Permalac Original Copper Matte is an air-dry, opaque, copper-colored acrylic lacquer for interior and exterior use.

Wilko Paint Wilkopon Primer Gray Wilko No. 342.22 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

ROOFDX SL™ is a siliconmodified, aliphatic polyurethane coating that is tough, flexible, and longlasting. ROOFDX SL has the appearance of lead coated copper but does not contain any lead. ROOFDX SL™ is used as a finish coat over Andek products such as POLAROOF NW, POLAROOF RAC, and ROOFDX SUPER, and it may be used over ROOFDX COPPER in situations where the most similarity to lead coated copper is required. ROOFDX SL is a dense complex barrier coating that combines a unique mineral, micaceous iron oxide, with a blend of flaked metals, including stainless steel, to protect against weathering, corrosion, and chemical degradation. ROOFDX SL's surface develops a silicon hammer finish that is extremely damage resistant and dirt resistant.

Permalac Original Semi-Matte is the best-selling, air-dry acrylic lacquer for interior and exterior use. Yields a low satin sheen.

Permalac Original Black is an air-dry, opaque black acrylic lacquer for interior and exterior use.

GacoDeck® Kit is a water-borne, single component waterproof deck system that can be applied over plywood, concrete, metal, fiberglass and previously coated decks. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.