Products in Power, Water & Utilities: Fluoropolymers

LNP THERMOCOMP 2X04505 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP THERMOCOMP 2Z004 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% milled glass.

LNP THERMOCOMP 2F004 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% glass fiber.

LNP THERMOCOMP 2X98703 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP THERMOCOMP 2C004 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP THERMOCOMP 2C003 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 15% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP THERMOCOMP 2X95787 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 15% glass fiber.

LNP THERMOCOMP 2F005 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 25% glass fiber.

LNP LUBRICOMP 2X00858 compound is based on Fluorinated ethylene propylene (FEP) resin containing proprietary fillers. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP 2FL24 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 20% glass fiber and 10% PTFE. Added features of this grade include: Wear Resistant.

PBY Plastics PB10000F is a compression molded virgin PolyTetraFluoroEthylene (PTFE) of premium grade.

Aerovac MR-FILM is a red/beige PTFE film with high elongation and excellent yield up to 600°F (315°C), which releases well from even the most aggressive resin systems.

Aerovac A5000 is a redwhite or violet FEP film with high elongation and excellent release characteristics up to 500°F (260°C), approved by numerous OEMs.

Alphalam X 130 is a PTFE Impregnated Fiberglass with Cast PTFE Film.

FB 1001 is a Flurolastomer with aramid. 0.125" ; 1 Ply Aramid Fluoroelastomer Belt [Press Cured].

FBT 1000 is a FKM With PTFE Film, wire mesh and aramid. 3.54mm”; Single Ply Wire EPDM Belt.

PTFE NEEDLE FELT is brown ,white in color.

Shield Products Super Shield is a fluoropolymer used for paint/coating. Fluoropolymer is a composite coating that consists of high-performance resins. It creates smooth, hard, non-stick surfaces. Fluoropolymer coatings are salt-resistant, acid-resistant, stain-resistant, and even graffiti-resistant. Our products are fire-proof, and they protect against water, sun, and wind damage.A Fluoropolymer coating is easy to apply. Because you can re-coat a fluoropolymer-protected surface without stripping it first, it is virtually maintenance free.

FBT 1001 is a FKM With PTFE Film and wire mesh. 3.54mm”; Single Ply Wire EPDM Belt

Aerovac VB-3 is Beige cast PTFE film with high elongation at elevated temperatures, up to 600°F (315°C) and a chemical etch on one side to ensure good adhesion.

FB 1102 is a Flurolastomer with wire mesh and aramid. 0.125" ; Single Ply Fiberglass Fluoroelastomer Belt [Press Cured].

VAC-PAK® HT 620 is a olive colored, high elongation film produced from PTFE resin with a chemically conditioned side to ensure good adhesion for use up to 620°F (326°C).

ALTAFLUOR® 2E0 FEP ENVIRO is designed specifically for use in environmental sampling applications. This cost effective choice is the preferred product for applications requiring the purity of FEP without exposure to aggressive chemical or other harsh conditions and it does not impart taste, odor or other contaminants.

Alphatex 500 is a PTFE Impregnated Fiberglass.

Cynergy® Beadless Weld Tubing are available in continuous lengths to 100 feet, depending on the nominal tube size. To complement our clamped Cynergy® connections, we offer welded components for applications requiring a more permanent connection. The smooth beadless weld reduces the number of connections and potential leak points. It can be customized to your specifications, welded spool pieces are easy to install, simply clamp into place.