Products in Other Industrial Applications: Acrylics & Acrylates

EnvisionTEC R11 is a liquid photopolymer that produces robust, accurate and functional parts. The material offers superior chemical resistance, a wide processing latitude, and excellent tolerance to a broad temperature and humidity range during and after build.

Classic Matte Sealer is an acrylic, single component sealer that is designed to be used over all of our stains and on polymer-modified cement toppings, waterborne colorants, concrete, brick, masonry, pavers, Spanish tile, stucco, and natural stone. Be sure to properly prepare surfaces before applying.

Addison Clear Wave Coatings A200 is a UV curable low modulus acylate adhesive obtained by radical polymerization. It is a one component resin ready for use, solvent free adhesive.

GHB® 4526BK consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive provides excellent long term holding power The tape incorporates a strong closed cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB4526BK tapes are well suited for interior and exterior applications and in many instances can replace rivets, screws,welds and liquid adhesives. This tape will bond to most dry,clean,oil free surfaces and provide bond strengths along with dynamic shear that is significantly higher than typical pressure-sensitive tapes.

Addison Clear Wave Coatings AC A109-PLV is a UV curable low modulus acylate adhesive obtained by radical polymerization. It is a one component resin ready for use, solvent free adhesive.

GHB® 4726GY consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive provides excellent long term holding power The tape incorporates a strong closed cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB4726GY tapes are well suited for interior and exterior applications and in many instances can replace rivets, screws,welds and liquid adhesives. This tape will bond to most dry,clean,oil free surfaces and provide bond strengths along with dynamic shear that is significantly higher than typical pressure-sensitive tapes.

EnvisionTEC E-Tool Series (E-Tool M, E-Tool, E-Tool 3SP) is filled with Barium Borosilicate Glass, known for its heat and chemical resistance, to deliver injection molds that can withstand high heat and pressure. Combined with EnvisionTEC’s 3D printing technologies, E-Tool 2.0 delivers highly accurate tooling with an exceptionally smooth surface finish.

Addison Clear Wave Coatings AC A109P is a UV-curable laminating adhesive.

GHB® 6626CL consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive provides excellent long term holding power The tape incorporates a strong closed cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB6626CL tapes are well suited for interior and exterior applications and in many instances can replace rivets, screws,welds and liquid adhesives. This tape will bond to most dry,clean,oil free surfaces and provide bond strengths along with dynamic shear that is significantly higher than typical pressure-sensitive tapes.

GHB® 4026WH consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive provides excellent long term holding power The tape incorporates a strong closed cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB4026WH tapes are well suited for interior and exterior applications and in many instances can replace rivets, screws,welds and liquid adhesives. This tape will bond to most dry,clean,oil free surfaces and provide bond strengths along with dynamic shear that is significantly higher than typical pressure-sensitive tapes.

EnvisionTEC HTM140 Series (HTM140 V2 M, HTM140 V2, HTM140 IV, HTM140 V3) is a high-temperature mold material that dramatically changes 3D printing capabilities for manufacturers. With a heat deflection temperature of 140°C straight out of the machine, high definition parts printed in HTM140 can be directly vulcanized in rubber, eliminating the need for a metal master.