Products in Oil, Gas & Mining: Solvent

AdvanSix Diallylamine (DALA) is a colorless to yellow liquid that emits a pungent ammonia-like odor. It's flammable, corrosive, and partially soluble in water, while completely dissolving in ethanol, benzene, and ethyl acetate. Under recommended storage conditions, it maintains stability. This versatile compound serves various industries as a key ingredient in pharmaceuticals, resins, paper production, and crop protection formulations. Moreover, its applications span as a solvent, corrosion inhibitor, ore flotation agent, and in rubber processing.

PETROSOL D 20/26 is a fraction of hydrogenated kerosene, with an initial and final distillation range typically between 200°C and 260°C. Notably, it exhibits very low aromatic content and has a faint odor. Its low aromatic content and nearly imperceptible scent make it a versatile choice for various applications, including use in paints, varnishes, fuel, solvents, lubricants, multipurpose oils, drilling fluids, insecticides, home air fresheners, and as an efficient degreaser.

Calumet Mineral Spirits <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Dakota Gasification Company's naphtha is much different from petroleum derived naphtha. It is composed of over 60 percent aromatics and is much closer to a BTX (Benzene, Toluene, Xylene) blend stock. The product is a white to straw colored, mobile, flammable, or combustible liquid with an aromatic odor. The naphtha is extracted from the raw synthesis gas after the gasification process in the rectisol unit.Dakota Gas naphtha is used as a feedstock in refineries where the benzene is extracted for purification. The remainder of the stream is refined and blended into gasoline, diesel, and other high value products.Typical composition of the BTX components in our naphtha is 44 percent benzene, 17 percent toluene, and 3.1 percent xylenes.

Calumet LVP 200 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 180-210 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 600 Solvent aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 195-208 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 170 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet Mineral Spirits aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 150-190 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet LVP 300 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 340 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 215 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 170ES aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet Hexane aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet VM P aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 200-230 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 200 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Conosol 260 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet LVP 100 aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 300-360 <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet HP IsoHexane aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 142 Flash <1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Calumet 210-245<1% aliphatic solvents suitable for use in a wide range of applications including FDA applications. Our specialty aliphatic solvent line consists of both hydrotreated and straight distillate solvents produced from domestic crude with low aromatics and optimal boiling. Selective fractionation begins at 82°F through 600°F with products ranging from Hexanes to Heptanes to Mineral Spirits to Mineral Seal Oils.

Altivia Methyl Isobutyl Carbinol (MIBC) is a stable, colorless liquid with a mild alcoholic odor. It is slightly soluble in water and miscible with most organic solvents. MIBC is commonly used by the coatings industry as a latent solvent to adjust cure rates and to reduce viscosity. It is also used as a solvent for dyes and stains, nitrocellulose and ethylcellulose lacquers, ester gums, natural resins, phenolics, and waxes. Methyl Isobutyl Carbinol is also referred to as 4-methyl-2-Pentanol or Isobutyl Methyl Carbinol.

Metafrax Trading International SA Technical Methanol is a colorless, flammable poisonous liquid.

ORG CHEM Group Sulfolane - 99 is an organic solvent predominantly used as an extraction solvent for BTX or aromatic removal from hydrocarbon feed streams but is also used in sour gas sweetening, (i.e., removal of acid gasses from a natural gas stream). Due to its combination of physical and chemical properties, Sulfolane® has been used in a variety of new applications including as an extraction distillation solvent, polymer solvent, polymer plasticizer, polymerization solvent, and in electronic/electrical applications and dyestuff intermediates.

Altivia Diisobutyl Carbinol, Technical Grade (DIBC) is a transparent, colorless liquid with a sweet odor. DIBC is a high-boiling, slow evaporating solvent that is very slightly soluble in water, but is miscible with most organic solvents. DIBC has low surface tension and is a non-HAP (Hazardous Air Pollutant) solvent. It is commonly used as an extraction solvent for multiple applications including acetic acid and ethanol from aqueous solution, ethyl acetone from methyl ethyl ketone, and many others. DIBC can also be used as a solvent for hydrogen peroxide manufacture, lacquers, shellac, printing inks, and alkyd resins. Diisobutyl Carbinol is also referred to as DIBC; 2,6 dimethyl-4- heptanol; Nonyl Alcohol; and Dimethyl Heptanol.