Products in Stationery, Art & Office Supplies: Polyesters

SYNTHOESTER 1080 is a highly branched, saturated polyester containing hydroxyl groups. If combined with aliphatic or aromatic polyisocyanates, it creates air- and oven-drying two-component lacquers that produce tough and highly chemically resistant films. It has applications in craft and hobby, metal coatings, industrial coatings, stationary art and office supplies, and other consumer applications.

Crestamould® B12R Sealer is a MEKP catalysed, brushable, slightly thixotropic sealer designed to coat expanded and extruded polystyrene foams. It acts as a chemical bridge and barrier between the polystyrene foam and either a laminate or a machinable polyester-based tooling paste such as Crestamould T27/T28. Its main use is for sealing of polystyrene foam blanks used in 5-axis plug and pattern work.

UNITHANE IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-colvent of Dipropylene glycol dimethyl ether (CAS#111109-77-4). UNITHANE IC-151 NF is designed for industrial coating applications requiring good gloss, chemical resistance and adhesion to a variety of substrates.

Arboblend® V5 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

PHOTOMER® 5310 is a di functional self matting oligomer used in UV/EB curable systems. It has been specially designed to formulate very low gloss UV varnishes. It exhibits of less yellowing and more hardness than PHOTOMER® 5010

Arboblend® V4 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

Highly branched, saturated polyester containing hydroxyl groups.

Arboblend® HT2 Natur combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

PHOTOMER® 9145 is an Unsaturated polyester oligomer diluted in DPGDA recommended for adhesion and pigment wetting.

Astrocure® 78-750 (Styrene Monomer 25%) is a low profile (low shrink), medium viscosity resin containing diluent monomer (styrene). The product is non-air inhibited and can be cured with ultra-violet/electron beam radiation or with a room temperature or heat cured peroxide system. Combinations of surface and through cure U.V. initiators are needed to formulate Astrocure® 78-750. Astrocure 78-750 can further be thinned with various solvents, multi-functional acrylates and other epoxy or urethane oligomers.

Arboblend® V1 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

FINE-CLAD® M-8761 is a pre-catalyzed carboxyl functional polyester designed to cure with bisphenol-A type epoxy curatives at a 50/50 polyester to epoxy ratio for hybrid systems.

Arboblend® V2 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

FINE-CLAD® M-8731 is a carboxyl functional polyester designed to cure with bisphenol-A type epoxy resins at a 60/40 polyester to epoxy ratio for hybrid systems.

Etna Tec Limited TEC 33100-F is a saturated polyester resin modified with fluorine, which allows for long term anti-graffiti properties. The product is supplied in propylene glycol monomethyl ether acetate (PMA).

Etna Tec Limited TEC 3296-F is a saturated polyester resin modified with fluorine, which allows for long term anti-graffiti properties. The product is supplied in propylene glycol monomethyl ether acetate (PMA).

Arboblend® V3 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

PHOTOMER® 9144 is a unsaturated polyester oligomer diluted in DPGDA recommended for adhesion and pigment wetting.

PBT functional compound, high density

Photomer® 5433 is a tough, abrasion resistant polyester acrylate. The oligomer exhibits of excellent pigment wetting in pigmented systems and excellent lithographic behavior in offset applications.

eSunBio 3025C is a General Grade Biodegradable Injection Material eSunBio3025C is mainly used in general injection molding products, can be used in electronic appliances, catering supplies, stationery supplies, daily products, cosmetics, toys, automobiles and other fields.For example, keyboard, mouse, mobile phone protective case, electronic clock case, U disk case, calculator case, instrument case, printer case, pen holder, pen holder, ink cartridge, makeup eyebrow pencil, toy parts, hanger and shell, cup, plate, knife, fork, spoon, etc.

PHOTOMER® 5434 is a low viscosity tetra-functional polyester acrylate oligomer, which exhibits excellent flexibility and reactivity in radiation curable formulations.